This is for a friend btw,
The pc is brand new, and the parts list is as follows:
Ryzen 3 1300x 3.5 ghz
EVGA GTX 1060 6gb SC
Asrock B350m micro atx
Ballistix Sport LT 1x8gb 2666mhz
Apevia ATX-BT700W Beast 700W ATX
unable to use Igpu due to ryzen limitations, gpu fan stops then starts, tried reseating gpu and pci-e 6 pin several times with no luck. Possibly the ram, as we just plugged it into an open slot without checking the correct slot, the manual for the mobo was bad and gave barely and instruction other than cpu cooler installation and ram installation. Just trying to leave my friend with good experiences of pc building
will give any other info needed.
EDIT: Tried reseating cpu, psu, checked connections, put ram in other DIMM slot, no effect. suspecting a faulty motherboard pci-e port? All other lights and fans working.
The pc is brand new, and the parts list is as follows:
Ryzen 3 1300x 3.5 ghz
EVGA GTX 1060 6gb SC
Asrock B350m micro atx
Ballistix Sport LT 1x8gb 2666mhz
Apevia ATX-BT700W Beast 700W ATX
unable to use Igpu due to ryzen limitations, gpu fan stops then starts, tried reseating gpu and pci-e 6 pin several times with no luck. Possibly the ram, as we just plugged it into an open slot without checking the correct slot, the manual for the mobo was bad and gave barely and instruction other than cpu cooler installation and ram installation. Just trying to leave my friend with good experiences of pc building
will give any other info needed.
EDIT: Tried reseating cpu, psu, checked connections, put ram in other DIMM slot, no effect. suspecting a faulty motherboard pci-e port? All other lights and fans working.