- Apr 30, 2015
- 30
- 0
- 4,530
Hi ,
My issue is -
No display , not even BIOS .
My pc specs are -
Mobo - MSI 970 Gaming motherboard
Processor- Amd fx6300
Graphics card - Sapphire R7 250x
PSU - Corsair VS650 W
RAM - 2×8GB Kingston huperx fury
Storage- Adata premium pro 240GB SSD and Seagate 1TB HDD
Operating system - Windows 10 pro
I had recently updated everything from Windows to hardware drivers to BIOS .but even after update pc was working fine about 15 days later this no display issue came .
I was working on pc and then suddenly the display lost .
On Boot:
- CPU + CPU Cooler, lights turn on fans spin
- Motherboard, lights turn on, no sound from the speaker
- Power Supply, fan turns on, every part seems to be receiving enough power
- Hard Drive & SSD, both show sign of life (Vibration and very minor scratch noise for HDD)
- Memory sticks in slot 2 and 4
RESULT: Everything turns on, every part seems to work 100% fine, as any other build would. I have tried plugging in a VGA, a DVI, and an HDMI monitor to the rig, to make sure it wasn't a faulty monitor, no success. The screens remain black. It is clearly impossible to access the BIOS or any boot CD (MSI or Windows).
I personaly went through my own list of checkups to make sure everything was done OK.
-- I made replacement of Corsair power supply unit , still issue remains .
Memory Slots - I tried every possible ram configuration with every stick.. Bare Boot Test - I tried booting with only 1 stick of ram, the CPU and PSU plugged in, same results.
Memory Inspection - All memory modules are inspected twice after each installation to make sure they are perfectly clicked, and plugged in.\
CPU Pins - I thoroughly checked that there was no bent pins on the motherboard or on the CPU before installation
My issue is -
No display , not even BIOS .
My pc specs are -
Mobo - MSI 970 Gaming motherboard
Processor- Amd fx6300
Graphics card - Sapphire R7 250x
PSU - Corsair VS650 W
RAM - 2×8GB Kingston huperx fury
Storage- Adata premium pro 240GB SSD and Seagate 1TB HDD
Operating system - Windows 10 pro
I had recently updated everything from Windows to hardware drivers to BIOS .but even after update pc was working fine about 15 days later this no display issue came .
I was working on pc and then suddenly the display lost .
On Boot:
- CPU + CPU Cooler, lights turn on fans spin
- Motherboard, lights turn on, no sound from the speaker
- Power Supply, fan turns on, every part seems to be receiving enough power
- Hard Drive & SSD, both show sign of life (Vibration and very minor scratch noise for HDD)
- Memory sticks in slot 2 and 4
RESULT: Everything turns on, every part seems to work 100% fine, as any other build would. I have tried plugging in a VGA, a DVI, and an HDMI monitor to the rig, to make sure it wasn't a faulty monitor, no success. The screens remain black. It is clearly impossible to access the BIOS or any boot CD (MSI or Windows).
I personaly went through my own list of checkups to make sure everything was done OK.
-- I made replacement of Corsair power supply unit , still issue remains .
Memory Slots - I tried every possible ram configuration with every stick.. Bare Boot Test - I tried booting with only 1 stick of ram, the CPU and PSU plugged in, same results.
Memory Inspection - All memory modules are inspected twice after each installation to make sure they are perfectly clicked, and plugged in.\
CPU Pins - I thoroughly checked that there was no bent pins on the motherboard or on the CPU before installation
Facebook
Twitter
Instagram