No display on monitor but everything turns on?

dylangiantsfan

Reputable
Dec 25, 2015
99
0
4,630
I don't know whats wrong it wont give a beep code (probably because I don't have a speaker) All the fans turn on, just no display. I have called support and they that its a different part and have me calling in a loop from company to company. EVGA said it was the motherboard Gigabyte said it was the GPU Powercolor said it was the Motherboard or Power supply.

Specs:

Gigabyte f2a68hm-h
AMD a10 7890k
Stock Wraith cooler
Crucial Balistix Sport 8x2 GB 1600mhz
PowerColor R7 360
EVGA 430w PSU

I have tried
- Swapping out ram/reseating
- Trying RAM in different slots
- Swapped out video card
- Swapped out CPU
- Tested PSU
- Took out and plugged in all the cables again.
- Cleared CMOS
- Tried integrated graphics
- Tested monitor
 
Solution
Swapped out CPU
Does that cpu work? If it does, then check the BIOS, you may need to update the BIOS for the A10 789K.
Also make sure you get the right BIOS for either F2c ( for the rev1.0 MB) or FB/FC ( for the rev1.1 MB). http://www.gigabyte.com/products/product-page.aspx?pid=5368#