[SOLVED] No display on new RTX 3060

matipeczkowski23

Reputable
Sep 1, 2018
2
0
4,510
0
I got a new Palit RTX 3060, as well as Corsair TX550M PSU and SP120 Elite Fan.

When I replace my old 1050ti with the RTX 3060, as well as the PSU and fan, everything turns on, GPU fans run but there is no display.

When i put the 1050ti back in, it doesn't work either, unless I change back the power supply to my old one (some generic 500w PSU) as well as the old fan.

I can't try the new rtx 3060 with the old power supply as it doesn't have the 6 pin cable that goes into the 3060.

Just wondering what can I do? Is the power supply or GPU at fault?

I already tried resetting CMOS, all cables are in properly as well.

Thanks
 
Have you tried updating the BIOS of your system to the latest version ? Which Motherboard do you have, and which CPU ? What is RAM configuration as well ?

You PALIT GPU requires a single 8-PIN PCIe/PEG connector right ? That corsair PSU is a decent model though.
 
Last edited:
Have you tried updating the BIOS of your system to the latest version ? Which Motherboard do you have, and which CPU ? What is RAM configuration as well ?

You PALIT GPU requires a single 8-PIN PCIe/PEG connector right ? That corsair PSU is a decent model though.
 
Last edited:

ASK THE COMMUNITY