No Display on newly built PC

PKTraxis

Reputable
Feb 21, 2014
4
0
4,510
I just put together a computer and I can't get the display to show up for me to access the BIOS and start getting the software ready to go. I'm not sure what the issue could be. I've tried connecting monitors through the motherboard and the graphics card, neither work. The 8 pin CPU power connector is connected, as well as the 24-4 pin connector (these seemed to come up a lot). The CPU fan, both graphics cards fans, both case fans, and the PSU fans all turn on. The RAM and Graphics Card are seated correctly as well. What else might I be missing that would prevent a display from turning on?

EDIT: completely removed graphics card as a test - the cpu and dram LEDS are briefly on but dont stay on, and there are long beeps.
 


DEEPCOOL TESSERACT SW Mid Tower Computer Case with Side Window and 2 Blue LED Fans SGCC+PLASTIC+RUBBER COATING
Rosewill Glacier Series 600W Modular Gaming Power Supply with Silent Aero-Diversion Fan, 80 PLUS Bronze ...
Seagate BarraCuda 2TB 3.5-Inch SATA 6 Gb/s Internal Hard Drive (ST2000DM006)
CORSAIR Vengeance LPX 16GB (2x 8GB) DDR4 DRAM 3000MHz C15 Memory Kit for DDR4 Systems
MSI B350M GAMING PRO Motherboard
EVGA GeForce GTX 1070 SC GAMING ACX 3.0 Black Edition, 8GB GDDR5, LED, DX12 OSD Support (PXOC) 08G-P4-5173-KR
AMD Ryzen 5 1600 Processor with Wraith Spire Cooler (YD1600BBAEBOX)
 
Hmm that CPU isn't listed as a supported CPU on the site. The only 1600 cpus listed are

RYZEN 5 Summit Ridge YD160BBBM6IAE PRO 1600 100 3.2 3M 16M B1 65 N/A

RYZEN 5 Summit Ridge YD160XBCM6IAE 1600X 100 3.6 3M 16M B1 95 N/A

RYZEN 5 Summit Ridge YD1600BBM6IAE 1600 100 3.2 3M 16M B1 65 N/A

The top CPU needs BIOS 2.7 to support it. The other 2 need BIOS 2.3
 


I've read that the latest bios can work with it, is there any way to update the bios without having the display turn on?