Here’s the full story:
Decided to build a pc for the first time and everything went well... to start with.
I managed to install windows 10 and all the drivers then restarted -> everything went well. I installed steam etc. I also installed rgb fusion for the motherboard(to change the colours) but the colours didn’t change so I thought I needed to restart it but before I restarted I realised I installed both the amd chipset and the nvidia drivers so i uninstalled the amd driver chipset(because I think I don’t need it) and now no display is showing up.
What could be the problem? Everything runs fine I.e the fans are working(case fans, cooler fans, and the gpu fan. Case led works and the led strip connected to the sata works as well) but no display, I suspect it could be a dead mobo after searching around
Full specs:
R3 1200
Gigabyte ab350 ds3h
8gb 2666 ram (2x4)
Gtx 1060 3gb
450w Corsair psu
Wd 1tb
Kingston 128gb ssd
Decided to build a pc for the first time and everything went well... to start with.
I managed to install windows 10 and all the drivers then restarted -> everything went well. I installed steam etc. I also installed rgb fusion for the motherboard(to change the colours) but the colours didn’t change so I thought I needed to restart it but before I restarted I realised I installed both the amd chipset and the nvidia drivers so i uninstalled the amd driver chipset(because I think I don’t need it) and now no display is showing up.
What could be the problem? Everything runs fine I.e the fans are working(case fans, cooler fans, and the gpu fan. Case led works and the led strip connected to the sata works as well) but no display, I suspect it could be a dead mobo after searching around
Full specs:
R3 1200
Gigabyte ab350 ds3h
8gb 2666 ram (2x4)
Gtx 1060 3gb
450w Corsair psu
Wd 1tb
Kingston 128gb ssd