no display working new pc

[Abhi10492]

Hi guys this is abhi singh


i hv new assambled pc
i5 4690k
and motherboard intel DH87MC
and graphic nvidia 610
and corsair 8 gb
and corsair 550 watt power supply

after doing all connection pc get started but no display ...and i try to start after jumper setting its get start and display comes ,but after 2 3 attemp , no dislpay please help me

 

[Helious]

Have you tried plugging your display/cable into the onboard video controller rather than the video card? you may need to use the onboard initially to get into the BIOS to force it to use PCIE/AGP instead of onboard..

 

[Abhi10492]

Have you tried plugging your display/cable into the onboard video controller rather than the video card? you may need to use the onboard initially to get into the BIOS to force it to use PCIE/AGP instead of onboard..

on board there is no Vga slot so ... i have not tested yet because i was not having a HDMI cable ... . now i baught a HDMI cable and will try to test as u said , and will post you thank in advance TOM HARDWARE

 

[Abhi10492]

Have you tried plugging your display/cable into the onboard video controller rather than the video card? you may need to use the onboard initially to get into the BIOS to force it to use PCIE/AGP instead of onboard..

hey i tried with the HDMI Cable and connected to the onbaord slot but same thing no display ,if there is no display how i will change the setting in BIOS

 

[Helious]

The only thing you can do now is pull out the CMOS battery on the motherboard for a few seconds, plug it back in and try again. If it still doesn't display then you need to return your motherboard(presuming you've tried with another cable and another display to rule out those two things).

 

[Abhi10492]

Have you tried plugging your display/cable into the onboard video controller rather than the video card? you may need to use the onboard initially to get into the BIOS to force it to use PCIE/AGP instead of onboard..

i tried that also i removed the CMOS and tried but no display and again i plug into graphic card and do the jumper display shows up now wht to do ???

 

[Abhi10492]

i have requested a new motherboard replacement for the same product and just now i want to confirm that my configuration is right or not please help me

i5 4690k
and motherboard intel DH87MC
and graphic nvidia 610
and corsair 8 gb
and corsair 550 watt power supply

thank you