"No drives found " on boot

EliteAP

Distinguished
Feb 17, 2013
245
3
18,915
Try another SATA port with your drive.

If that doesn't work, try use a recovery USB for Windows 7 and go through the installation until the stage where you see the drives. If you can't see it, then your drive may be dead.

You could use another PC with an external drive reader to see if it works on another PC (or connect it inside the PC). If it works on ANOTHER PC, that could mean your Mobo isn't working properly.

Have you tried overlocking?
 

rnunojoao

Commendable
Nov 26, 2016
10
0
1,510


Hello, thanks for you answer.
I changed the SATA port and doesn't appears the "No Drivers found" anymore neither "No Overclocking", but the computer is rebooting in the boot or when loads windows 7 I can't even acess the motherboard settings.
I tested the driver on other pc and works fine.
 

rnunojoao

Commendable
Nov 26, 2016
10
0
1,510


I changed my graphics card also I tried to change the old one but it's the same thing.