No Gemstar installed with Catalyst 4.6 -- What am I missing

[Guest]

Archived from groups: alt.comp.periphs.videocards.ati (More info?)

Hello,

A few days ago I posted here for information and guidance on
installing my 8500DV in a new machine I've just built. Based on those
recommendations, I've now installed Catalyst 4.6, MMC 9.1.0.0, and
DAO/MDAC 9.1.0.0. I did not attempt to install the DVD Decoder since
I use PowerDVD exclusively. Nor did I install any of the original and
previous versions of software prior to installing Catalyst 4.6.

All seemed to go OK but one VERY SIGNIFICANT PROBLEM...
NO VERSION of GEMSTAR+ was included or installed. I can find it no
where.

Did I miss something? Did I do something wrong?

How can I get Gemstar+ installed. Or, as an alternative, what other
INTERACTIVE TV program guide might be available?

Anyone have any ideas?

TIA


f





Reply Address Purposly Altered to eliminate SPAM
Reply by Post Only Please

 

[Guest]

Archived from groups: alt.comp.periphs.videocards.ati (More info?)

nospam4me@notaol.com.invalid wrote:
>
> Hello,
>
> A few days ago I posted here for information and guidance on
> installing my 8500DV in a new machine I've just built. Based on those
> recommendations, I've now installed Catalyst 4.6, MMC 9.1.0.0, and
> DAO/MDAC 9.1.0.0. I did not attempt to install the DVD Decoder since
> I use PowerDVD exclusively. Nor did I install any of the original and
> previous versions of software prior to installing Catalyst 4.6.
>
> All seemed to go OK but one VERY SIGNIFICANT PROBLEM...
> NO VERSION of GEMSTAR+ was included or installed. I can find it no
> where.
>
> Did I miss something? Did I do something wrong?
>
> How can I get Gemstar+ installed. Or, as an alternative, what other
> INTERACTIVE TV program guide might be available?
>
> Anyone have any ideas?
>
> TIA
>
> f
>
> Reply Address Purposly Altered to eliminate SPAM
> Reply by Post Only Please

gemstar is on the install AIW CD, its a licenced product so you wont find
it to download.

 

[Guest]

Archived from groups: alt.comp.periphs.videocards.ati (More info?)

On Wed, 30 Jun 2004 04:29:17 GMT, nospam4me@notaol.com.invalid wrote:

>Hello,
>
>A few days ago I posted here for information and guidance on
>installing my 8500DV in a new machine I've just built. Based on those
>recommendations, I've now installed Catalyst 4.6, MMC 9.1.0.0, and
>DAO/MDAC 9.1.0.0. I did not attempt to install the DVD Decoder since
>I use PowerDVD exclusively. Nor did I install any of the original and
>previous versions of software prior to installing Catalyst 4.6.
>
>All seemed to go OK but one VERY SIGNIFICANT PROBLEM...
>NO VERSION of GEMSTAR+ was included or installed. I can find it no
>where.
>
>Did I miss something? Did I do something wrong?
>
>How can I get Gemstar+ installed. Or, as an alternative, what other
>INTERACTIVE TV program guide might be available?
>
>Anyone have any ideas?
>
>TIA
>
>
>f
>

Explore the CD your card came with. Look for a gemstar directory.
You don;t need to remove your cat 4.6.

 

[Guest]

Archived from groups: alt.comp.periphs.videocards.ati (More info?)

On Wed, 30 Jun 2004 07:55:39 GMT, Gordon Scott
<gordsmail@NOSPAMshaw.ca> wrote:


>
>gemstar is on the install AIW CD, its a licenced product so you wont find
>it to download.

Thanks for responding.

I knew Gemstar was never listed as a separate item among the ATI
drivers and software downloads. But, I guess I expected it to be
included with the Catalyst 4.6 update. Heh, heh...was I mistaken about
that!

Based on Blood Dawg's subsequent post, I found it on a prior ATI CD
and now have it installed.

Thanks, agaiin, for taking the time to respond.

f





Reply Address Purposly Altered to eliminate SPAM
Reply by Post Only Please

 

[Guest]

Archived from groups: alt.comp.periphs.videocards.ati (More info?)

On Wed, 30 Jun 2004 08:24:15 -0400, Blood Dawg
<blood_dawg@hotmail.com> wrote:

>
>Explore the CD your card came with. Look for a gemstar directory.
>You don;t need to remove your cat 4.6.

Thank you.

Late last night when I'd completed all the ATI installations and saw
Gemstar had not been concluded, I actually did look on both the
original (MMC7.7) installation CD and the upgrade CD (Catalyst 8.1)
I found a Gemstar folder on the original and made a feeble attempt to
install but couldn't get it to load. It turns out I was clicking on
the wrong set-up icon in the Gemstar folder.

Based on your advice I browsed the original CD again and saw the error
I'd made last evening. I've since installed Gemstar. Thank you for
guiding me back to that original CD.

A couple minor points of interest.....

1- When I attempted to set up the channel line-up, Gemstar gave me
four possible line-ups based on the cable TV channel availabilities in
my area. One of the channel slots it asked me to verify was MMNU. Now
understand, I work for the cable company (Time Warner) in this area
and I've never heard of MMNU. I made a selection and it turned out to
be OK. But I have no idea what channel MMNU is.

2- On my old machine, the Gemstar grid had a drop-down menu which
indicated the days for which TV scheduling had been downloaded. That
drop-down menu is NOT included in the Gemstar grid I've just installed
on the new machine. I CAN access those future days on the "Dates" menu
at the top of the grid. It's a minor point which I can live with,
however.

Thanks again for your response.

f





Reply Address Purposly Altered to eliminate SPAM
Reply by Post Only Please

 

[Guest]

Archived from groups: alt.comp.periphs.videocards.ati (More info?)

On Wed, 30 Jun 2004 14:31:31 GMT, nospam4me@notaol.com.invalid wrote:

>On Wed, 30 Jun 2004 08:24:15 -0400, Blood Dawg
><blood_dawg@hotmail.com> wrote:
>
>>
>>Explore the CD your card came with. Look for a gemstar directory.
>>You don;t need to remove your cat 4.6.
>
>Thank you.
>
>Late last night when I'd completed all the ATI installations and saw
>Gemstar had not been concluded, I actually did look on both the
>original (MMC7.7) installation CD and the upgrade CD (Catalyst 8.1)
>I found a Gemstar folder on the original and made a feeble attempt to
>install but couldn't get it to load. It turns out I was clicking on
>the wrong set-up icon in the Gemstar folder.
>
>Based on your advice I browsed the original CD again and saw the error
>I'd made last evening. I've since installed Gemstar. Thank you for
>guiding me back to that original CD.
>
>A couple minor points of interest.....
>
>1- When I attempted to set up the channel line-up, Gemstar gave me
>four possible line-ups based on the cable TV channel availabilities in
>my area. One of the channel slots it asked me to verify was MMNU. Now
>understand, I work for the cable company (Time Warner) in this area
>and I've never heard of MMNU. I made a selection and it turned out to
>be OK. But I have no idea what channel MMNU is.
>
>2- On my old machine, the Gemstar grid had a drop-down menu which
>indicated the days for which TV scheduling had been downloaded. That
>drop-down menu is NOT included in the Gemstar grid I've just installed
>on the new machine. I CAN access those future days on the "Dates" menu
>at the top of the grid. It's a minor point which I can live with,
>however.
>
>Thanks again for your response.
>
>f
>
>
>
>
>
>Reply Address Purposly Altered to eliminate SPAM
>Reply by Post Only Please


Looking on my Catalyst CD, f, there's a Gemstar folder there, too.
It's in the Install folder. Might be a more up-to-date version.

patrickp

patrickp@5acoustibop.co.uk - take five to email me