No images on-screen; no beep codes

[stebbinsd]

I got a new motherboard in the mail today. It came with a motherboard microphone already installed on it. I hooked my PSU up to it and turned on the power.

Initially, I got a series of 3-4 beeps per second. They were all of equal length and evenly dispersed from each other.

This is what it sounded like: https://www.youtube.com/watch?v=e62GHQ3b7H0

I remembered that I forgot to install memory, so I installed them and re-started the PC.

Now, I no longer get any beep codes. However, I still don't get any images on the monitor.

Any ideas?

 

[johnnyq1233]

Could you please list the parts of your system...

 

[Satan-IR]

What are system specs? Mobo, CPU, RAM, GPU, PSU.

 

[stebbinsd]

Could you please list the parts of your system...

First, I edited my OP to give more information. Please check that.

Second, my CPU is an AMD FX-8320, my motherboard is a Gigabyte GA-970A-UD3P, my RAM is 10GB of DDR3 ram (don't know the manufacturers; but they are two different manufacturers). What else do I need to list?

 

[Satan-IR]

Use single RAM sticks and test see if it boots with any one of them.

Mixing and matching different RAM modules from different manufacturers is always a bit tricky, esp. on AMD platforms.

What's the PSU brand/model?

 

[maestro0428]

Does you cpu fan spin up? Your psu fan spin up?

 

[rgd1101]

MERGED QUESTION
Question from stebbinsd : "Computer turns on; no images appear on-screen"

I posted this thread: http://www.tomshardware.com/answers/id-3547156/computer-randomly-shuts.html

However, this thread has been marked as "solved," even though my problem is clearly not solved! This may explain why I am getting no new replies to it!

Please do NOT list this thread as "solved" until I not only got my parts replaced, but I am definitely in Windows (regular Windows, not safe mode) and using the programs I have installed! Until then, please don't list my problem as being solved!

Anyway, I've got a new problem: I finally got my CPU fan in the mail today. At least now, the CPU fan starts to spin, so that's a good sign.

But now I have a new problem! Although the fans will spin, I don't get any images on-screen!

I'm still using the same parts as before, except the CPU fan. The same CPU, the same motherboard, the same PSU, the same graphics card, the same everything!

At least before, I was able to get into safe mode without it spontaneously shutting off!

How can I possibly have damaged another part ... without even using it?!