No-input monitor after bluescreen

[byegelie]

I have a problem, i was just playing some dying light on my week-old pc, i bluescreened with some video error, and after trying to restart it said my windows was corrupted to i had to repair it. After restarting to get into my bios settings, i just didnt get a screen, and my monitor didn't get any input, while it still works with my laptop. Usb ports are still working aswell, my specs are:

Motherboard: Asus prime B2500PLUS
Processor: Intel-i5 7400
Video Card: Asus Phoenix GeForce GTX 1050 2GB
Internal memory: Kingston HyperX Fury black HX424C15FB2/8
Ssd: Samsung 970 Evo 250GB
Monitor: ASUS VE248HR
power supply: Coolermaster masterwatt 550

 

[scout_03]

check your gpu in another system .

 

[byegelie]

check your pu in another system .

Sorry this is the first pc i built, what do you mean by that? Plus its not even a week old so how could it be fucked already?

 

[scout_03]

new parts could fall out so check it in another system and what psu you have .

 

[byegelie]

new parts could fall out so check it in another system and what psu you have .

O i didnt include my power supply sorry, it's a Coolermaster masterwatt 550

 

[scout_03]

then try to test gpu in another system since monitor work with laptop .

 

[byegelie]

then try to test gpu in another system since monitor work with laptop .

Test it in like another desktop? Sorry im not too experienced

 

[scout_03]

you remove it from your computer and put it in anohter system then check if there is video out from it and it will work on generic driver after try too install the driver for it in this system .

 

[byegelie]

you remove it from your computer and put it in anohter system then check if there is video out from it and it will work on generic driver after try too install the driver for it in this system .

I think i understand, but i have a dvi cable from my motherboard and my gpu, both dont work, or doesnt that matter? Also how would i install the driver when i cant even see my bootup?

 

[scout_03]

remove gpu from system and plug monitor to onboard and see if you have video also check if there is any debug led on .

 

[byegelie]

remove gpu from system and plug monitor to onboard and see if you have video also check if there is any debug led on .

I unplugged my gpu but there's still no input, also i couldnt see any other lights on then usual.

 

[scout_03]

you remove if from board and psu power and try cmos reset system off power .

 

[byegelie]

you remove if from board and psu power and try cmos reset system off power .

My gpu isnt directly connected to my psu though, should i try resetting cmos without my gpu installed? i have tried resetting cmos with gpu in a couple of times now

 

[scout_03]

should also be remove frrom board to use internal and do the reset gpu off system .

 

[byegelie]

should also be remove frrom board to use internal and do the reset gpu off system .

Is there any way to know i did the reset? i think i reset it by connecting the 2 pins with a screwdriver, but im not sure. Still no input to screen though

 

[scout_03]

you could only remove the little button battery on the board for about 1 min but dont touch both side off it with your hand then put it back if there still no video try to turn your psu off and on if he have a switch in the back .

 

[PdxPetmonster]

you remove if from board and psu power and try cmos reset system off power .

My gpu isnt directly connected to my psu though, should i try resetting cmos without my gpu installed? i have tried resetting cmos with gpu in a couple of times now

Does the video card REQUIRE a connection to the PSU? I know some 1050's don't, but I can't say for sure all of them don't. I'd verify that, as that could cause no video.

 

[byegelie]

you could only remove the little button battery on the board for about 1 min but dont touch both side off it with your hand then put it back if there still no video try to turn your psu off and on if he have a switch in the back .

I tried both of those and still didn't get an input to the monitor. What would happen if i would be to touch both sides of the battery? What if i did that accidentally before, would that fuck me over?

 

[scout_03]

you did touch both pins with power on .