Hi, I just bought a Galaxy GTX 650 Ti to replace my old PNY GT 430, expecting a major boost in performance but that wasn't the case
I unisntalled my old drivers, slotted the new card correctly, plugged the power cables, downloaded and installled the latest NVIDIA drivers (310.70) and after countless tests in different games my FPS is exactly the same or worse...My Windows experience in Graphics did went up from 6.7 to 7.4 but that was it...
My specs:
CPU: E5700 dual core 3.0Ghz
MOBO: Intel G41 Express Chipset P49G by PChips
RAM: 4gb DDR3
PSU: ATX 500w PIV
OS: Windows 7 32bit
Display: 32inch Sony Bravia 720p HD TV (using the VGA to DVI adapter the card came with)
I also get this weird 3D/high contrast/yellowish look in all games if I leave the 3D vision programs from nvidia installed
Btw when I used GPU-Z on default clock it says 540Mhz and on GPU clock 966, which I found weird since this card is factory overclocked and the default clock should be 928mhz
After Heaven Benchmark v3.0 Basic
FPS: 21.7
Scores: 548
Min FPS: 5.4
Max FPS: 54.7
Settings
Render: direct3d11
Mode: 1920x1080 4xAA fullscreen
Shaders: high
Textures: high
Filter: trilinear
Anisotropy: 16x
Occlusion: enabled
Refraction: enabled
Volumetric: enabled
Tessellation: extrem
I know my cpu isn't the best but its a decent 2 core processor and most games I own only utilize 2 cores at max (its only 10months old) My psu is a year and a half old and its not a branded supply but it's a 500w shoulnd't it perform ok on a card that only requires 400w?
Thanks in advance.
I unisntalled my old drivers, slotted the new card correctly, plugged the power cables, downloaded and installled the latest NVIDIA drivers (310.70) and after countless tests in different games my FPS is exactly the same or worse...My Windows experience in Graphics did went up from 6.7 to 7.4 but that was it...
My specs:
CPU: E5700 dual core 3.0Ghz
MOBO: Intel G41 Express Chipset P49G by PChips
RAM: 4gb DDR3
PSU: ATX 500w PIV
OS: Windows 7 32bit
Display: 32inch Sony Bravia 720p HD TV (using the VGA to DVI adapter the card came with)
I also get this weird 3D/high contrast/yellowish look in all games if I leave the 3D vision programs from nvidia installed
Btw when I used GPU-Z on default clock it says 540Mhz and on GPU clock 966, which I found weird since this card is factory overclocked and the default clock should be 928mhz
After Heaven Benchmark v3.0 Basic
FPS: 21.7
Scores: 548
Min FPS: 5.4
Max FPS: 54.7
Settings
Render: direct3d11
Mode: 1920x1080 4xAA fullscreen
Shaders: high
Textures: high
Filter: trilinear
Anisotropy: 16x
Occlusion: enabled
Refraction: enabled
Volumetric: enabled
Tessellation: extrem
I know my cpu isn't the best but its a decent 2 core processor and most games I own only utilize 2 cores at max (its only 10months old) My psu is a year and a half old and its not a branded supply but it's a 500w shoulnd't it perform ok on a card that only requires 400w?
Thanks in advance.