No post beep, replaced parts

[Shortyrose]

About a week ago my computer started shutting down a lot, figured out the Cpu fan stopped working, CPU got hot. Husband cleaned everything out, put back together - no post beep.
Had someone look at it, tried another PSU - still no post beep
Ordered a new Mobo - no post beep
Ordered a new CPU - no post beep.
fans works , no post beep and nothing to see on the monitor
NO beeps when taking out the RAM

Looked at the sticky solutions and triplechecked everything

PSU: 500w
Mobo - M68Mt-S2P
CPU: AMD FX - 6300 black edition

 

[swifty_morgan]

do any lights come on........ or is it just dead?

 

[Shortyrose]

this is what it looks like

theres no led on the mobo

 

[HiTechObsessed]

What's the power supply?

 

[Shortyrose]

What's the power supply?

turbolink ATX-TL500W-BK

 

[plaintuts]

can you please check your power supply here
http://www.tomshardware.com/answers/id-1804779/power-supply-unit-tier-list.html

you may have wasted a bunch of components and your husband is probably stressed by now.

 

[HiTechObsessed]

Turbolink is built by Apevia, which is a crappy PSU brand. It sounds like a blown PSU, especially if even a whole new motherboard won't even attempt to POST. Do you have another power supply you can test?

 

[Shortyrose]

Turbolink is built by Apevia, which is a crappy PSU brand. It sounds like a blown PSU, especially if even a whole new motherboard won't even attempt to POST. Do you have another power supply you can test?

I dont currently, i might be able to get my hands on one this evening, I'll update the progress. Thank you

 

[HiTechObsessed]

Good luck! Hopefully it's as simple as that. Let me know!

 

[swifty_morgan]

did anybody think to turn the switch on the back of the power supply on?

 

[HiTechObsessed]

Considering the system worked fine a week ago, and now is giving problems, I would assume so lol but good question, nonetheless. I still forget to flip it on every now and then, leaving me that split second where my mind goes "CRAP" until I un-stupid myself and flip it back on lol

 

[Shortyrose]

Considering the system worked fine a week ago, and now is giving problems, I would assume so lol but good question, nonetheless. I still forget to flip it on every now and then, leaving me that split second where my mind goes "CRAP" until I un-stupid myself and flip it back on lol

Yes the switch is on.. lol we had a friend come over and tested with his powersupply ( its a higher tier on the list than mine ) and still the same issue

 

[swifty_morgan]

maybe i LOOKED AT THE WRONG PDF BUT THE SIDE THAT THE WIRING FOR THE POWER SWItcH SEEMS TO BE ON THE WRONG SIDE?

sorry for the caps. ................. but the one I get to doesn't even look the same as the picture you posted. gigabytes site turned to a turd.


are you sure the BIOS on the board supported the 6core processor?

 

[Shortyrose]

maybe i LOOKED AT THE WRONG PDF BUT THE SIDE THAT THE WIRING FOR THE POWER SWItcH SEEMS TO BE ON THE WRONG SIDE?

sorry for the caps. ................. but the one I get to doesn't even look the same as the picture you posted. gigabytes site turned to a turd.


are you sure the BIOS on the board supported the 6core processor?

the wired switch is correct , if it wasnt the computer wouldnt even turn on ( as said the fans etc do turn on) and we checked compatability for cpu and mobo

 

[swifty_morgan]

the reason I asked was because the motherboard is old and may still have an old BIOS. therefore the processor will not allow the machine to boot. it may work fine with an updated BIOS.

 

[Shortyrose]

the reason I asked was because the motherboard is old and may still have an old BIOS. therefore the processor will not allow the machine to boot. it may work fine with an updated BIOS.

we replaced it so its completely new and even if this was the case there is no way for me to get into the bios

 

[swifty_morgan]

you purchased it new. but the design is old. and may have been made 2 years ago.

do you have an fx955 or similar or an old Phenom II(quad core/tri core/dual core / Athlon II / Sempron 100 Series laying around? or can you borrow one?