Question No post no beep no signal.

[Came12on]

Okay... so whilst rendering something on Sony vegas, my computer shut itself down and hasn't come back on since. Here is the kicker...

I have bought a new case/mobo/psu and tried my old cpu ryzen 2600 in the new mobo/psu. Still the same problem. I've also tried my old graphics card in the new setup. Still no signal. I tried 1 stick of ram (in the old setup) that didn't work.

The cpu and mobo psu cable is attached properly.

The only thing I can think of is that I haven't used the set of tiny mobo Stand off screws (because my new case has all stand offs already in place and all seem to fit my atx mobile correctly.

New gear
Case: msi gungnir 110r
Psu: seasonic focus 550w
Mobo: tuf gaming x570

Cpu ryzen 5600x
Gpu gt1070


Please help, very annoyed.

 

[Lutfij]

You should parse the specs to your build with a before and after of your build. As for your PSU, can you include the age of the PSU? Have you tried breadboarding the build to rule out a short in your case?

 

[Came12on]

You should parse the specs to your build with a before and after of your build. As for your PSU, can you include the age of the PSU? Have you tried breadboarding the build to rule out a short in your case?

Newly bought parts
Case: msi gungnir 110r
Psu: seasonic focus 550w
Mobo: tuf gaming x570

Current pc spec
Cpu ryzen 5600x
Gpu gt1070
Vengeance ram 16gb 2 x 8

Old parts I tried with the new bought parts:
Ryzen 2600
Asus 550 graphics card


I think I'm gonna have to try build without case now

 

[Came12on]

Have you tried breadboarding the build to rule out a short in your case?

Just breadbkrded the old gpu, 5600x cpu new mobo new psu, ram... nothing. Basically a different pc with the same outcome


Edit* the cpu is dead.