Question NO POST NO DISPLAY HELP

[pcape101]

Basically one day my pc just didnt turn on, so after assesing it I put a diagnose that the PSU went dead, but recently I bought a brand new PSU but the PC wouldnt give any post or display still.

Specs are:
Mobo: Gigabyte ga-880gm-ud2h rev 1.4
GFX: GTX 1050ti Zotac checked on a separate pc and its working
RAM: Kingston 1333mhz
Processor: I actually tried 2 different processors to boot with Athlon X2 and a Phenom X4 955BE, with both still no display or post.
PSU: Corsair VS450 brand new

Please help as I dont have the budget to afford a new motherboard atm, thanks for all replies.

 

[RememberThe5th]

Firstly clear CMOS.
https://forums.tomshardware.com/faq/clear-cmos-how-it-works.1848202/
Remove your GPU and try with onboard.
And also try with one stick of ram.

 

[pcape101]

Firstly clear CMOS.
https://forums.tomshardware.com/faq/clear-cmos-how-it-works.1848202/
Remove your GPU and try with onboard.
And also try with one stick of ram.

Unfortunately already tried that, will try again to be sure tho, should I try VGA aswell?

 

[RememberThe5th]

Whatever your motherboard has output, just clear cmos first and use 1 stick of ram, disconnect all HDD's/storage from sata and power.
Keep only keyboard connected.

 

[pcape101]

Whatever your motherboard has output, just clear cmos first and use 1 stick of ram, disconnect all HDD's/storage from sata and power.
Keep only keyboard connected.

I will try all the steps that you said and then will comeback to you asap when i've tried it.

 

[pcape101]

Whatever your motherboard has output, just clear cmos first and use 1 stick of ram, disconnect all HDD's/storage from sata and power.
Keep only keyboard connected.

Wait also after I clear CMOS do I put the battery back in?

 

[RememberThe5th]

Yes, why not? It should not matter. When i do troubleshooting i keep it out. (its easier to clear cmos)

 

[pcape101]

Yes, why not? It should not matter. When i do troubleshooting i keep it out. (its easier to clear cmos)

Okay, So I cleared the CMOS, and tried to start on internal mobo gpu, but still no display, and I also suspect my beeper is broken, what else should I try?

 

[RememberThe5th]

You have speaker?The little one that goes onto motherboard?
Remove everything except the CPU (ofc keep the cooler on) if you have it, it should beep for not having ram.

 

[pcape101]

You have speaker?The little one that goes onto motherboard?
Remove everything except the CPU (ofc keep the cooler on) if you have it, it should beep for not having ram.

No, I dont think I have it on the motherboard, neither in the case, I tried to take it out yesterday, but it never gave out any sound, so I just threw it aside, like I took everything out except CPU but still it wasnt beeping. What should I try?

 

[pcape101]

You have speaker?The little one that goes onto motherboard?
Remove everything except the CPU (ofc keep the cooler on) if you have it, it should beep for not having ram.

Also is there a possibility that the mobo's internal GPU died?