Question No POST only LED’s turn on, can’t even boot

[FatAssFoetus]

All the leds on my motherboard and case turn on but the pc won’t even boot. It was working fine before but I upgraded to a z390 and i5 9600k with 600w bronze power supply. I have no idea why it isnt even starting up.

 

[rgd1101]

and the full system spec? include make and model of the psu
and go thru the check list https://forums.tomshardware.com/thr...ng-about-post-boot-no-video-problems.1285536/

 

[FatAssFoetus]

Okay, so here are the specs:
i5 9600k
z390-h rog strix motherboard
EVGA 600w 80 plus power supply
Vengeance LPX 2400mhz DDR4 ram (2x4gb sticks)
2tb wd hdd
and 120gb ssd with os on it
RX480 8gb msi gpu

I can now boot the PC and the fans are spinning but i get no display on the monitor. On the motherboard i have a Memok LED's which indicate there is something wrong and the red light turns on which is for the CPU.
thanks for the help

 

[Deleted member 14196]

bent cpu pins?

 

[FatAssFoetus]

No, the motherboard is brand new and cpu is as well as i upgraded from a z170 with and i5 6600k

 

[rgd1101]

No, the motherboard is brand new and cpu is as well as i upgraded from a z170 with and i5 6600k

new doesn't mean it install correctly.

 

[FatAssFoetus]

new doesn't mean it install correctly.

Yes, it has been installed correctly, does anyone have any other things i can try?

 

[rgd1101]

did you go thru the check list?
try booting with 1 stick of ram, and with only the cpu to use the igpu?

 

[FatAssFoetus]

Yes i have tried 1 stick of ram, without gpu, different slots of ram. I also had this problem before, so i returned the cpu and ordered the exact same one again and i still have the problem. Could this be a problem of the power supply having the wrong pins for supplying power, or being outdated as i originally built this system in early 2017

 

[rgd1101]

replace the motherboard?

 

[FatAssFoetus]

Thats what I am going to do sometime this week but I feel that isn't whats causing is

 

[FatAssFoetus]

I noticed the 12v power connector on the motherboard for the CPU has different shapes on the individual connectors to my power supply, could that make a difference or are all power supplies the same?

 

[FatAssFoetus]

UPDATE: I have a new motherboard and the pc is now booting fine and everything seems to be working. Except my CPU cooler, as I enter the windows home screen the temperature is already at 100 degrees. How would I check if my pumps dead or not properly connected because it was working fine with my old setup for 2 years

 

[rgd1101]

Read the cooler manual to check the setup

 

[FatAssFoetus]

I reapplies thermal paste and tried different headers on the mobo for the aio pump, still not working. It should be fine as I used it for 2 years and while waiting for my motherboard I didn’t remove it from the case