NO REVERSE THRUST WITH F2 KEY PRESSED

[Guest]

Archived from groups: microsoft.public.games.zone.simulation (More info?)

I Can't get reverse thrust to work when pressing F2 and
holding down as it should.Can anyone please help ??? as
trying to select reverse with my mouse on the throttle
quadrant is a bit of a pain when trying to keep straight
on runway at same time !!!

 

[ME]

Archived from groups: microsoft.public.games.zone.simulation (More info?)

ghm,

be sure IAS set isn't activated and be sure throttle is all the way back
to idle posistion. after that's said and done, you should be able to slap
the F2 key a couple of times ,then hold it down for full reverse.it will
only work when throttle is all the way back. if that doesn't work, i'm at a
loss for solutions. goodluck !


"GHM" <graemehmurray@speed-mail.co.uk> wrote in message
news:1a6e501c42349$e14385a0$a601280a@phx.gbl...
> I Can't get reverse thrust to work when pressing F2 and
> holding down as it should.Can anyone please help ??? as
> trying to select reverse with my mouse on the throttle
> quadrant is a bit of a pain when trying to keep straight
> on runway at same time !!!

 

[Guest]

Archived from groups: microsoft.public.games.zone.simulation (More info?)

"me @ comcast" <me @ comcast> wrote in
news:#sb4aN1IEHA.2376@TK2MSFTNGP12.phx.gbl:

> ghm,
>
> be sure IAS set isn't activated and be sure throttle is all the way
> back
> to idle posistion. after that's said and done, you should be able to
> slap the F2 key a couple of times ,then hold it down for full
> reverse.it will only work when throttle is all the way back. if that
> doesn't work, i'm at a loss for solutions. goodluck !
>

Assuming your aircraft has reverse thrust available.

scott s.
..

 

[ME]

Archived from groups: microsoft.public.games.zone.simulation (More info?)

good point !


"scott s." <75270_3703a@csi.xcom> wrote in message
news:Xns94CE7FD05DD92752703703acsicom@205.188.138.161...
> "me @ comcast" <me @ comcast> wrote in
> news:#sb4aN1IEHA.2376@TK2MSFTNGP12.phx.gbl:
>
> > ghm,
> >
> > be sure IAS set isn't activated and be sure throttle is all the way
> > back
> > to idle posistion. after that's said and done, you should be able to
> > slap the F2 key a couple of times ,then hold it down for full
> > reverse.it will only work when throttle is all the way back. if that
> > doesn't work, i'm at a loss for solutions. goodluck !
> >
>
> Assuming your aircraft has reverse thrust available.
>
> scott s.
> .