No signal but power

[lukewhite90]

So 2 months back I built my first pc using a pentium 4560 with an asrock h1110m hds, it did not receive a signal to which I brought it to support in a near by store who claimed the mobo was faulty.... I proceeded to buy another in which I then discovered was not compatible with 7th gen processors. Today I received my i3 6100, I have put it all together again powers up perfectly no turn off and turn back on but I can't get signal on my TV at all I've used both hdmi and a dvi with hdmi on opposite side of cable. I do not have a monitor and will not purchase 1 till I know what the problem is. My graphics card is a gigabyte geforce gtx 1050 from which I read needs drivers installed. Ive tried plugging in hdmi and dvi into graphics card also. BTW my keyboard and mouse both light up when plugged into new build. Please help me, my budget build is costing me a fortune which I sadly do not have.

 

[lukewhite90]

I have tried plugging in everything 1 by 1
Ram in different slots
no graphics card start up
Hard drive plugged in and out
Tried a different TV

 

[lukewhite90]

Woooo got it to boot menu weird as hell plugged in keyboard before turning on and we have lift off