Hello,
english is not my mother tongue but I will try my best. My setup:
CPU: Pentium G4600
GPU: Red Dragon RX 460 4GB
MOBO: Astock Z270 pro4
2 x 4GB DDR4 Samsung 2133MHz
PSU: Gigabyte PB 500w
Monitor: BenQ GW2270HM
I built the PC without the GPU and everything was fine. After I installed the GPU and connected the HDMI cable to the GPU I got ´´No signal detected´´. This GPU doesn't have external power cable. The power goes through the PCIE. I made sure that the Intel HD graphic is disabled, primary GPU adapter in BIOS is PCIe, IGPU multimonitor in BIOS is disabled, I took out the CMOS battery for at least 30 minutes, I´ve also tried the ´´PCH PCIE ASPM support enabled´´ because I found that it may help, I updated the BIOS to the most recent version, I´ve tried 2 cables - HDMI and VGA cable with DVI to VGA adapter. Any ideas please?
english is not my mother tongue but I will try my best. My setup:
CPU: Pentium G4600
GPU: Red Dragon RX 460 4GB
MOBO: Astock Z270 pro4
2 x 4GB DDR4 Samsung 2133MHz
PSU: Gigabyte PB 500w
Monitor: BenQ GW2270HM
I built the PC without the GPU and everything was fine. After I installed the GPU and connected the HDMI cable to the GPU I got ´´No signal detected´´. This GPU doesn't have external power cable. The power goes through the PCIE. I made sure that the Intel HD graphic is disabled, primary GPU adapter in BIOS is PCIe, IGPU multimonitor in BIOS is disabled, I took out the CMOS battery for at least 30 minutes, I´ve also tried the ´´PCH PCIE ASPM support enabled´´ because I found that it may help, I updated the BIOS to the most recent version, I´ve tried 2 cables - HDMI and VGA cable with DVI to VGA adapter. Any ideas please?