I bought an aorus Rx 580 8gb from eBay which had some bad thermal paste causing it to instantly peg to 90 degrees under any load. I wanted to see what the difference would be once I changed out the paste so I ran some unigen valley. Screen went black but PC was still on. So I force shut down but when I restart, it gives the monitor no signal. I've tried using my old Rx 560 to see if that would give a signal, but it did not. The out from the mobo is not giving anything either.
My build-
Ryzen 3 2200g (has integrated graphics)
Gigabyte a-320m-s2h mobo
Aorus Rx 580 (new) Asus strix rx 560 (old)
8gigs ballistix 2666 mhz ram
My build-
Ryzen 3 2200g (has integrated graphics)
Gigabyte a-320m-s2h mobo
Aorus Rx 580 (new) Asus strix rx 560 (old)
8gigs ballistix 2666 mhz ram