No signal from graphics card or Motherboard

[Oliver99a]

I recently got a graphics card. Have had my pc for about 1 year without one. But when I tried installing it I got no signal from it to monitor. Getting no signal from motherboard either even with the graphics card out of pci-e slot. I've tried to switch pci-e slot. I get no signal from vga, hdmi or dvi to hmdi converter.

System specifications:
Windows 8.1
Asus Maximus VII Hero Motherboard
Asus Gefore STRIX 1060 6gb Graphics card
Corsair RM850 power supply

If you need more info just ask
Thanks

 

[elbert]

Reset the bios without the video card and see if works. You may have to pull the battery for 5 minutes to reset if there is no other way. If you get video then check if you have any bios updates. Also try only 1 stick of ram test for each to see if its the issue. You may have bumped on and got it loose.

 

[alexoiu]

Is there a LED that stays red after starting the board?
If yes, which one?

 

[shknawe]

push the reset button and tell us what code it shows in the led window.

 

[Oliver99a]

push the reset button and tell us what code it shows in the led window.

It just stayed at 00

 

[Oliver99a]

Is there a LED that stays red after starting the board?
If yes, which one?

Sorry but I don't understand what you mean. On motherboard? what type of lamp?

 

[Oliver99a]

Reset the bios without the video card and see if works. You may have to pull the battery for 5 minutes to reset if there is no other way. If you get video then check if you have any bios updates. Also try only 1 stick of ram test for each to see if its the issue. You may have bumped on and got it loose.

It's currently late here and I have to go to bed pretty soon for school in the morning. But when you said pull the battery for 5 minutes, what did you mean? To pull the power cord out of the outlet on the wall for 5 min or what?

 

[elbert]

Nope the battery on the motherboard. Its small about the size and shape of a nickle. You should also pull the power cord before opening the case. This clears your bios to ensure your running on default.

 

[Oliver99a]

Nope the battery on the motherboard. Its small about the size and shape of a nickle. You should also pull the power cord before opening the case. This clears your bios to ensure your running on default.

I did as you instructed, but I'm still getting no signal :/

 

[shknawe]

does your device manager recognize the card when installed?

 

[elbert]

With resetting the bios and getting no video from the motherboard output I suggest testing your RAM. Disconnect all driver and pull one stick of ram. Test and if you get nothing then swap it out for the stick of RAM.

 

[Oliver99a]

With resetting the bios and getting no video from the motherboard output I suggest testing your RAM. Disconnect all driver and pull one stick of ram. Test and if you get nothing then swap it out for the stick of RAM.

What do you mean by disconnect all drivers?