No signal to Monitor though new motherboard VGA or HDMI. Have a new Ryzen CPU too.
CPU: Ryzen 5 1600
Motherboard: Asus Prime B350M-A
RAM: Crucial - 8GB (1 x 8GB) DDR4-2133 Memory
GPU: Gigabyte - GeForce GTX 1050 Ti 4GB
Case: Corsair - 200R ATX Mid Tower Case
PSU: Corsair - 430W 80+ Bronze
Tried changing from intel cpu to Ryzen. RAM, PSU, and GPU were all working with previous motherboard and still are. I have tried getting display though HDMI, VGA, and DVI to HDMI, but am getting no signal to the monitor. The PC powers on, the fans spin, and the keyboard and mouse light up, but no display. PCpartpicker says that all my parts are compatible so I'm very stumped. I've tried pressing the CAPs button, it changed from lighted to not lighted. The motherboard is pulsing orange. PC turns off immediately after pressing power button, don't have to hold it down. Yes, 8 pin CPU cable is installed, along with the 24 pin main one.
Steps I have tried:
1. Resetting the CMOS
2. Putting together the parts outside of the case
3. Getting a fresh MOBO and CPU to see if these were the issue, still the same problems
4. Putting the RAM in each of the four slots
5. Booting up the PC without the GPU installed
6. Discharging the power by holding down the power button.
7. Checking over and over if all the connections are attached to the motherboard.
I have no idea what the issue is, would value any help
CPU: Ryzen 5 1600
Motherboard: Asus Prime B350M-A
RAM: Crucial - 8GB (1 x 8GB) DDR4-2133 Memory
GPU: Gigabyte - GeForce GTX 1050 Ti 4GB
Case: Corsair - 200R ATX Mid Tower Case
PSU: Corsair - 430W 80+ Bronze
Tried changing from intel cpu to Ryzen. RAM, PSU, and GPU were all working with previous motherboard and still are. I have tried getting display though HDMI, VGA, and DVI to HDMI, but am getting no signal to the monitor. The PC powers on, the fans spin, and the keyboard and mouse light up, but no display. PCpartpicker says that all my parts are compatible so I'm very stumped. I've tried pressing the CAPs button, it changed from lighted to not lighted. The motherboard is pulsing orange. PC turns off immediately after pressing power button, don't have to hold it down. Yes, 8 pin CPU cable is installed, along with the 24 pin main one.
Steps I have tried:
1. Resetting the CMOS
2. Putting together the parts outside of the case
3. Getting a fresh MOBO and CPU to see if these were the issue, still the same problems
4. Putting the RAM in each of the four slots
5. Booting up the PC without the GPU installed
6. Discharging the power by holding down the power button.
7. Checking over and over if all the connections are attached to the motherboard.
I have no idea what the issue is, would value any help