No signal input, new build

[Devimon]

Hello this is my first time building a pc from the ground up. I have before changed out parts and done minor repairs and I figured now would be a good time to try a build of my own. I got the parts already, assembled the pc per whatever instructions I could find, and powered it on. While it powered on, the led's lit up, fans turned on, the monitor still read no signal.

I made sure the monitor was on the correct input and all the internal connections are in line but no luck.

Case: Corsair Graphite Series 600T
Graphics: SAPPHIRE Vapor-X 11163-05 Radeon HD 5770 1GB 128-bit GDDR5
Motherboard: SABERTOOTH 990FX R2.0 AMD 990FX(AM3+)
Monitor:ASUS VW246H Glossy Black 24" 2ms(GTG) HDMI Widescreen LCD Monitor

Power Supply:CORSAIR TX Series CMPSU-750TX 750W
SSD: hOCZ Vertex 2 OCZSSD3-2VTX90G 90gb internal
HD: Seagate Barracuda ST1000DM003 1TB intenral
Wifi: Rosewill RNX-N300X IEEE 802.11b/g, IEEE 802.11n Draft 2.0 PCI Wireless Adapter
Blue-Ray: ASUS Black 12X BD-R 2X BD-RE 16X
Processor: AMD FX-4170 Zambezi 4.2GHz (4.3GHz Turbo) Socket AM3+ 125W Quad-Core Desktop Processor
RAM: four G.SKILL Ripjaws Series 240 pin DDR3
Fans:XIGMATEK FCB (Fluid Circulative Bearing) Cooling System Crystal Series CLF-F1252 120mm Red LED Case Fan

I am really running out of ideas on what to do with this, I cannot see anything on my screen, and since neither the motherboard nor case have a built in speaker for bios I can't tell if the bios is running into a problem.

If someone could please help me I would really appriciate it.

 

[Rockdpm]

Tell me this. Is there any LED's that light up on the board to indicated a area of possible problem?

 

[Devimon]

Tell me this. Is there any LED's that light up on the board to indicated a area of possible problem?

The SB_Power LED and Dram LED

 

[Devimon]

Correction the DRAM_LED is flashing

 

[Rockdpm]

Ok try removing one stick at at a time of RAM.

 

[Devimon]

Ok try removing one stick at at a time of RAM.

When I was down to two it decided to run, thank you.

 

[Devimon]

The motherboard nor the O.S. Will detect more than 4 gigabytes of memory now while I currently have 12 gb worth of ram installed.

 

[Rockdpm]

What bit of Windows 7 did you get? Windows 32bit won't detect anything over 4 GB

 

[Devimon]

What bit of Windows 7 did you get? Windows 32bit won't detect anything over 4 GB

I have 64 bit.

 

[Rockdpm]

Ok well did you try either of the sticks that you took out?

 

[Devimon]

Ya, I currently have all four in and it still says I have 4 gigs, three sticks says four gigs, so on and so forth.

 

[Rockdpm]

Ok well either you have a dead DIMM which would probably raise a major flag and you probably wouldn't even post if that was happening. SO I'm still thinking its a dead stick

 

[Devimon]

Ok well either you have a dead DIMM which would probably raise a major flag and you probably wouldn't even post if that was happening. SO I'm still thinking its a dead stick

That would be three dead sticks at this point f it were true.

 

[Devimon]

Ok well either you have a dead DIMM which would probably raise a major flag and you probably wouldn't even post if that was happening. SO I'm still thinking its a dead stick

I moved them around after having made sure they were all in and now they all read.

 

[Rockdpm]

so it works now for you?

 

[Devimon]

so it works now for you?

Everything works, thank you for the help.

 

[Rockdpm]

No problem. Please Select a best Answer before you go. And remember if you need anymore help were always here to help

 

[Devimon]

Best answer selected by Devimon.