Hello everyone!
I wouldn't post this if it wasn't necessary. I have read 20+ posts on this, did all I can, no help.
As you can see I get no signal from my motherboard.
My PC consists of:
Mobo: Asus PRIME A320M-K
CPU: AMD Ryzen 5 2400G/with vent
RAM: 1x G.Skill DDR4-2400Mhz 8GB
SSD: Palit SATA 3 120GB
SSD2: W.D Green M.2 2280 240GB
PSU: SL-500A 500W
As I said, I get no signal on my monitor. Tried VGA and HDMI. On box I can see "Amd ryzen desktop 2000 Ready". So bios version should be okay. On mobo site with specifications, this CPU is compatible with bios. Okay. I bought then an AMD A6 -9500E just to see if bios is problem. Guess what? No signal on that one either. RAM is fitted perfectly, 2 clicks, one on both sides. I tryed both sockets. Nothing. Tryed 2 VGA cables, they both work elsewhere...
Then I tryed with old graphics card Gigabyte gv-NX66128DP which only has VGA. Still no signal.
Resseting CMOS? Did that. Disconnected power, took out battery. Wait for 30 minutes. Put it back inside. Still nothing.
Dont ask me about 4 pin connector. It is in. 24pin? Yea, its in.
Tryed VGA and HDMI on other monitor. Nope.
The only thing I noticed is that with Ryzen5 leds on board shine, and with A6 they blink somewhat.
I have a speaker, heard no beeps from it, never.
All connectors are fitted in perfectly.
When building, mobo was all the time on that bag which it comes in, so I dont think its static.
Any ideas?
I wouldn't post this if it wasn't necessary. I have read 20+ posts on this, did all I can, no help.
As you can see I get no signal from my motherboard.
My PC consists of:
Mobo: Asus PRIME A320M-K
CPU: AMD Ryzen 5 2400G/with vent
RAM: 1x G.Skill DDR4-2400Mhz 8GB
SSD: Palit SATA 3 120GB
SSD2: W.D Green M.2 2280 240GB
PSU: SL-500A 500W
As I said, I get no signal on my monitor. Tried VGA and HDMI. On box I can see "Amd ryzen desktop 2000 Ready". So bios version should be okay. On mobo site with specifications, this CPU is compatible with bios. Okay. I bought then an AMD A6 -9500E just to see if bios is problem. Guess what? No signal on that one either. RAM is fitted perfectly, 2 clicks, one on both sides. I tryed both sockets. Nothing. Tryed 2 VGA cables, they both work elsewhere...
Then I tryed with old graphics card Gigabyte gv-NX66128DP which only has VGA. Still no signal.
Resseting CMOS? Did that. Disconnected power, took out battery. Wait for 30 minutes. Put it back inside. Still nothing.
Dont ask me about 4 pin connector. It is in. 24pin? Yea, its in.
Tryed VGA and HDMI on other monitor. Nope.
The only thing I noticed is that with Ryzen5 leds on board shine, and with A6 they blink somewhat.
I have a speaker, heard no beeps from it, never.
All connectors are fitted in perfectly.
When building, mobo was all the time on that bag which it comes in, so I dont think its static.
Any ideas?
Facebook
Twitter
Instagram