No Signal on New Monitor

[rxalityy]

Hello,
I just built my PC two nights ago.
We (me and my dad) were hooking up the monitor when it gave us the (HDMI No signal)
We tried using HDMI and DisplayPort and neither worked. And the pins are not bent, and the mo/bo and graphics card are powered.
My monitor is https://www.asus.com/Monitors/MG278Q/
My Graphics card is a Zotac 1070 Mini
And my Mo/Bo is a ASRock Z270 Mini-ITX
Hopefully someone has the answer.

 

[boju]

Hi
Was this the first time the system was powered up or was it working before?

No signal could be the cause by various things.

There led error codes on the motherboard?

Are both 24pin atx and 8pin cpu power connected?

What cpu and memory have you installed?

Can you give us a link to your motherboard please, there's a couple slightly different.

 

[rxalityy]

Hi
Was this the first time the system was powered up or was it working before?

No signal could be the cause by various things.

There led error codes on the motherboard?

Are both 24pin atx and 8pin cpu power connected?

What cpu and memory have you installed?

Can you give us a link to your motherboard please, there's a couple slightly different.

Hello, so sorry for the late response.
The motherboard is the ASRock Fatal1ty Z270 Mini-ITX/AC.
We just built it, and when trying to connect the monitor, it didn't give a signal. There is no LED code on the motherboard.
Both pins are connected.
The CPU is Intel i7-7700k 4.2 ghz, and the memory is corsair vengeance 2x8 16 GB DDR4 RAM.
We realized that the CPU socket has bent pins, and are currently working to fix it.

 

[boju]

Ok thanks for getting back, looks like you're on top of things, bent pins isnt the best way to start out a new pc. Was probably the issue, hope it gets fixed and no underlying problems, good luck.