Hey there guys!
Today I moved my pc parts from my old tower to a new one. However, after I set everything up and turned on the pc my monitor didn't receive a signal.
I checked if the GPU was inserted correctly. It was and it was spinning its fans when the power was turned on.
I tried connecting to the MOBO instead and boot the BIOS, but I still had the black screen.
I didn't change any parts and the same setup was working fine just today.
My specs are:
MOBO: MSI B450M GAMING PLUS
CPU: AMD Ryzen 5 2600x
GPU: MSI Nvidia GTX 1070
RAM: 1x Hyper X Fury DDR4 2666Mhz 16gb
HDD: 1xSamsung 860 EVO 500gb
1x Samsung 850 EVO 250gb
1x Seagate Barracuda 1tb
PSU: Corsair CX 750m
Cooling: Corsair Hydro H60 and 4 Stock fans
Case: Cooler Master Trooper SE
Thanks for any possible solutions.
Today I moved my pc parts from my old tower to a new one. However, after I set everything up and turned on the pc my monitor didn't receive a signal.
I checked if the GPU was inserted correctly. It was and it was spinning its fans when the power was turned on.
I tried connecting to the MOBO instead and boot the BIOS, but I still had the black screen.
I didn't change any parts and the same setup was working fine just today.
My specs are:
MOBO: MSI B450M GAMING PLUS
CPU: AMD Ryzen 5 2600x
GPU: MSI Nvidia GTX 1070
RAM: 1x Hyper X Fury DDR4 2666Mhz 16gb
HDD: 1xSamsung 860 EVO 500gb
1x Samsung 850 EVO 250gb
1x Seagate Barracuda 1tb
PSU: Corsair CX 750m
Cooling: Corsair Hydro H60 and 4 Stock fans
Case: Cooler Master Trooper SE
Thanks for any possible solutions.