Question No Signal or Posting After Crash/Windows Update

[madcar86]

Recently my PC crashed for an unknown reason. There was a Windows 10 Update pending. Upon reboot, I was getting no signal and it appeared to not be posting. I swapped my 1070 for an older GPU and it booted fine and updated Windows. So I swapped the 1070 back in and the same problem occurred. I am hoping the 1070 isn't dead. Any advice would be appreciated.

 

[rgd1101]

full system spec? include make and model of the psu

 

[madcar86]

So i got it to boot with the 1070 however still no signal. I had to RDP into the PC to get a display. Under Device manager it says the GPU has a Code 43 error. I am researching now what that means, still hoping its not a dead card.

 

[madcar86]

full system spec? include make and model of the psu

CPU: AMD FX-8350 4 GHz 8-Core Processor (Purchased For $0.00)
Motherboard: Gigabyte GA-990FXA-UD3 ATX AM3+ Motherboard (Purchased For $0.00)
Memory: Kingston HyperX Fury Blue 8 GB (2 x 4 GB) DDR3-1866 CL10 Memory (Purchased For $0.00)
Storage: Samsung 850 EVO-Series 250 GB 2.5" Solid State Drive (Purchased For $0.00)
Storage: Western Digital Caviar Blue 1 TB 3.5" 7200RPM Internal Hard Drive (Purchased For $0.00)
Video Card: Zotac GeForce GTX 1070 8 GB Mini Video Card (Purchased For $0.00)
Case: Corsair 200R ATX Mid Tower Case (Purchased For $0.00)
Power Supply: EVGA 600B 600 W 80+ Bronze Certified ATX Power Supply (Purchased For $0.00)
Optical Drive: Asus DRW-24B1ST/BLK/B/AS DVD/CD Writer (Purchased For $0.00)
Optical Drive: LG WH14NS40 Blu-Ray/DVD/CD Writer (Purchased For $0.00)