Question No signal to monitor after M.2 SSD swap ?

May 15, 2023
1
0
10
So I bought a new Samsung 980 Pro M.2 SSD and I since I already had another M.2 SSD installed on my motherboard all I did was swap the old M.2 SSD to the bottom slot on my motherboard since the new M.2 is faster than the older one. Well after I did the swap I went to turn on the computer and everything turned on except the monitor. So I swapped the old M.2 SSD back to its original slot and removed the new one but it still won't display any signal on the monitor.
I have tried to clear CMOS but that didn’t work. Also tried to change output from the GPU and still nothing.

PC specs:

CPU: Ryzen 7 5600
Motherboard :ASUS Prime B550M-A
RAM: 16gb G.Skill 3600MHz
GPU: RTX 2060
Storage:
  • Kingston m.2 nvme 250gb (boot drive)
  • Seagate HDD 2Tb
  • Samsung m.2 nvme 1Tb (not installed)
 
Last edited: