No Signal to the Monitor

Rommyent

Reputable
Aug 15, 2014
14
0
4,510
So i am having Monitor Problems.

Whilst trying to install my Video Card (Fresh PC Build), i was having alot of troubles, specifically, the Video Card CD not working properly, it kept saying "We were unable to detect any XFX product at this time", so i looked up, and did some research, which led me to disabling my onboard graphics in the BIOS (Boot Settings during Start-up), and i thought it would help, but as my computer was restarting, my Monitor kept No Signalling me, no signal on each output (VGA, HDMI, and DVI), my Computer, from what i can tell, is still working (the only way i know is that the Disc Tray still functions, and the fan does as well).

So far to fix it, i've tried Unplugging the Power Supply Cables from the Motherboard. but still nothing.

If anyone can help, i will be extremely grateful.
 
**UPDATE**
After reading through all the Manuals, i have figured out that i Disabled the "Internal Graphics" and after i did this, i saved and Exited, this is when my Problem started to occur, as i got No Signal onto my Monitor
 
continuing my reading in the manual, correct me if im wrong, i need to remove the batter, no? and if you can, check back like once every 5 minutes, im gonna be at this for awhile
 
So i took out the PS for a good 10 minutes, put it back in, and now when i press the power button, it just flashes its normal blue light for a millisecond, then goes away
 
Ignore that last post, turns out one of the PS chords wasnt plugged in fully, i plugged it in, and my problem is still here, no monitor signal, i plugged the blue cable into my laptop and it works fine