Question no signal

Oct 19, 2019
13
0
10
Hello all,

Currently building PC desktop.
I've got a ROG GTX 1060 GPU, however when i plug an HDMI cable/DVI cable in it doesn't pick up the monitor.

I've tried installing the driver for this GPU on another laptop hard drive with my laptop, then put that hard drive into my new gaming pc but no luck as the installation of the driver tries and detects the GPU on my laptop which isn't there.

I have got ROG ASUS Maximus IV Extreme-Z motherboard which doesn't have onboard Graphics to boot up into safe mode etc or generally to then install the driver.

The fans and LED's are working on the graphic's card as it's plugged in via a 8pin as required so i know i don't have any issues there with this graphic's card.
All powered by Corsair CX600.

Please help! Any suggestion / ideas more than welcome & would be really helpful!

Kind Regards
Jord
 

Lutfij

Titan
Moderator
Might want to list your specs like so:
CPU:
Motherboard:
Ram:
SSD/HDD:
GPU:
PSU:
Chassis:
OS:

You don't install drivers like that. You install drivers on the system that has the necessary hardware onboard.

Also, that CX PSU shouldn't be anywhere near that PC, since it's not reliably built.
 
Oct 19, 2019
13
0
10
ASUS Maximus IV Extreme-Z Motherboard
ROG GTX 1060
600W Power Supply
i7 2600k
4 x 4GB of Kingston Hyperbeast RAM
500GB / 250GB HDD with Windows 10 already on

I was using another power supply but had wrong connections on the ends