I bought new hdd 3TB Seagate Barracuda for my computer with i3 processor GA-H61M-DS2. I installed Windows Server 2008 R2. At first it was able to install the OS but when partitioned in Disk Management, it get problem: slowing down the computer and later hang up.
Here's the real problem now. I reinstalled the server but the 3TB hdd was not detected already. When set the boot mode to EFI (since no other option), it detected the hdd / 3TB but cannot detect usb as it is my bootable installer of server OS. When enable the Legacy mode it never displayed my 3TB hdd in BIOS settings. I searched information including forums saying that UEFI would help as it support over 2TB. But the problem is no UEFI mode in BIOS Setting 🙁. Please help as I need this for our enrollment system ;((
Here's the real problem now. I reinstalled the server but the 3TB hdd was not detected already. When set the boot mode to EFI (since no other option), it detected the hdd / 3TB but cannot detect usb as it is my bootable installer of server OS. When enable the Legacy mode it never displayed my 3TB hdd in BIOS settings. I searched information including forums saying that UEFI would help as it support over 2TB. But the problem is no UEFI mode in BIOS Setting 🙁. Please help as I need this for our enrollment system ;((