No VGA display or hdmi

[Darius Gouws]

Hello

I bought n new MSI H110M PRO-VH PLUS, Kingston ValueRAM 4GB DDR4 2133MHz Memory, and a Intel Celeron G3930 Dual Core 2.90 GHz LGA1151.
My problem that i have is that i have no Video out put on a VGA on a old CRT monitor also i have no out put on my HDMI port that i connect to my TV. As far as know is everything compatible.

I also noticed on the motherboard on its ez debug leds that the cpu led was on. I tried a different power supply aswell, and also I removed the the motherboard from case if there was a short, None of the aboved work. I also removed the ram, and powered on to see if I get a beep noice. nothing aswell.

If someone can please help me thank you

 

[SkyNetRising]

I also noticed on the motherboard on its ez debug leds that the cpu led was on.

This means - cpu not detected or fail.
Probably cpu installed wrong or bent cpu socket pins.

 

[Phillip Corcoran]

The Celeron G3930 is not listed as a compatible CPU for that board:

https://www.msi.com/Motherboard/support/H110M-PRO-VH-PLUS#support-cpu

Supported Celeron's are these three:

G3920
G3900T
G3900

 

[SkyNetRising]

Oh right. That's Kaby Lake celeron. Motherboard requires BIOS update to support it.

 

[Darius Gouws]

The Celeron G3930 is not listed as a compatible CPU for that board:

https://www.msi.com/Motherboard/support/H110M-PRO-VH-PLUS#support-cpu

Supported Celeron's are these three:

G3920
G3900T
G3900

it does support it. look again

 

[Darius Gouws]

I also noticed on the motherboard on its ez debug leds that the cpu led was on.

This means - cpu not detected or fail.
Probably cpu installed wrong or bent cpu socket pins.

I am starting to think the motherboard has a problem. Also what are the odds of getting a faulty CPU now a days. I don't really see posts about it

 

[Darius Gouws]

Oh right. That's Kaby Lake celeron. Motherboard requires BIOS update to support it.

I do I go around doing that? I don't have any other cpu's or parts to put in. Is there a way to do it via flash drive or something?

 

[SkyNetRising]

You could return your Kaby Lake celeron and get Sky Lake celeron instead (like G3900);
Or change motherboard to one with B250 chipset;
Or get somebody to perform BIOS update for you (they will still need Sky Lake cpu to do that).

 

[Darius Gouws]

You could return your Kaby Lake celeron and get Sky Lake celeron instead (like G3900);
Or change motherboard to one with B250 chipset;
Or get somebody to perform BIOS update for you (they will still need Sky Lake cpu to do that).

I checked on the board, the cpu socter some pins are bended. I don't know how that happens, cpu can only fit one way and close. Or do some boards sometimes come out with bended pins or what? Its just here and there that a pin is bended

 

[SkyNetRising]

Probably bent them when removing protective plastic cap or when installed cpu or when removed it.
You can try to unbend the pins. But that requires a lot of time and patience.
https://www.youtube.com/watch?v=mhOYEQ65a94&feature=youtu.be

 

[Darius Gouws]

Probably bent them when removing protective plastic cap or when installed cpu or when removed it.
You can try to unbend the pins. But that requires a lot of time and patience.
https://www.youtube.com/watch?v=mhOYEQ65a94&feature=youtu.be[/quotemsg

Yeah I messed up big time. Somehow I bended the pins when inserting the cpu. but I don't know how it happened, But yeah expensive mistake. I just hope the cpu will still work. Thanks for the help