• Hey there, Guest! Share your idea for a new trophy in the forums and win bragging rights and a $100 Amazon gift card! Check out the New Community Trophy Contest here!
  • Pardon our dust as we work on some regularly scheduled forum maintenance. You may notice some missing features during this time. Thank you for your patience!

No video from motherboard ga-z77x-d3h

Yme05

Honorable
Oct 5, 2012
6
0
10,510
0
I am getting no video from my motherboard. I just installed a ga-z77x-d3h with a new i3 2120 and am not getting any video from the board or a video card, have tried all the video out on the board. Monitor works fine and everything is hooked up properly. Rma?

Thanks for any help.
 

Yme05

Honorable
Oct 5, 2012
6
0
10,510
0
I tried a different cable and on a different input for my monitor. If I get the drivers what do I do next? Video card still resulted in no output, my monitor says no signal detected.
 

inzone

Champion
Moderator
What video card do you have? If you have intergrated graphics then you connect the monitor cable to the motherboards video port , if you have a video card then you connect the monitor cable to the video cards port.
Once you put the video card in you have to load the drivers for it and uaually Windows will want to load the Windows default drivers but you really should load the video card drivers that came with the card on the install cd.
 

inzone

Champion
Moderator
You may have to manualy switch the input on the monitor if you don't have it set to the correct input and the monitor doesn't have an automatic detection.
If your connecting by DVI then you may have to switch to the DVI input on the screens on screen display menu.
 

Yme05

Honorable
Oct 5, 2012
6
0
10,510
0
I'm hoping to use the on board graphics. Tried an old radeon hd 3650, it is functioning, got nothing. Made sure the monitor was on the the right input. Made sure all the connections were secure and all done. I removed everything and found a extra stand off, which I removed. Reinstalled everything and made sure I hooked it all up properly, still no signal from any of the video outputs.

Any other ideas?

And thanks again for all of the help.
 

Similar threads