[SOLVED] No video or post ASRock B365M Pro4

[louwestin]

I'm getting no video or post for a ASRock B365M Pro4. I upgraded the PSU to a 650 Watt, but I kept the same CPU. (Cleaned off the old thermal paste.) I only installed one DDR 4 in slot A2 since that's what I understood from the manual.

Edit for clarity:

I've removed the dedicated video card and tried the inter grated graphics, but same issue.

Board is getting power, hence fans are spinning and USB thumb drive in the back was lit up.

Motherboard manual is terrible, so I can't figure out if I need to have dual memory models or if one is fine?

 

[--SID--]

Make and model of the old and new PSU?

Reset motherboard BIOS with a jumper on the CMOS-RESET pins or flip out the CMOS battery.

 

[CountMike]

I'm getting no video or post for a ASRock B365M Pro4. I upgraded the PSU to a 650 Watt, but I kept the same CPU. (Cleaned off the old thermal paste.) I only installed one DDR 4 in slot A2 since that's what I understood from the manual.

I've removed the dedicated video card and only plugged into that and tried that, but same issue.

Motherboard manual is terrible, so I can't figure out if I need to have to memory models or if one is fine?

Which CPU ???? Some don't come with integrated graphics.
With Intel, those are ones with "F" at end.

 

[louwestin]

Thanks for the replies.

Old power supply was a Powerspec 400W. New one is a PowerSpec Gold 650W.

CPU is a i5-8400. It supports inter grated graphics, so that issue is ruled out.

 

[louwestin]

I fixed it. I thought that the RAM stick was supposed to be in the second slot based on the manual, but I was wrong. When I moved it the far left slot (Near the CPU) the post screen came up on and I went on to reinstall Windows.