I have gone through all the steps in the "system wont boot" thread: https://forums.tomshardware.com/thr...deo-output-troubleshooting-checklist.1285536/
I am stuck in my debugging efforts with this:
Everything worked just fine before switching the cpu cooler. First try of putting on the new cpu cooler left too much thermal paste on the cpu. But cleaned it up and installed again. Also I overtightened the cpu cooler but fixed it.
MOBO: Asus H110M-PLUS D3
CPU: I7-6700K
RAM: Hyperx DDR3
PSU: EA-550 Platinum
What is my next step in debugging this?
I am stuck in my debugging efforts with this:
- CPU gets warm some seconds after trying to boot (tried with cooler dismounted)
- Power on USB ports etc.
- Beeps when no RAM
- No beep when booting with CPU, RAM
Everything worked just fine before switching the cpu cooler. First try of putting on the new cpu cooler left too much thermal paste on the cpu. But cleaned it up and installed again. Also I overtightened the cpu cooler but fixed it.
MOBO: Asus H110M-PLUS D3
CPU: I7-6700K
RAM: Hyperx DDR3
PSU: EA-550 Platinum
What is my next step in debugging this?
Last edited: