No video Output from Gigabyte J1900N D3V

[shortleif]

I just bought this Mobo and a bunch of different parts to build an HTPC. But when I boot the system I just can't get any video output, can't even see the boot-up/bios screen. I've tried using both DVI and VGA/D-Sub.

The system seem to be stable, it doesn't reboot or make an sounds at all. Any ideas?

EDIT: Tried mounting it outside the chassis and reset CMOS just in case, no changes.

 

[Phillip Corcoran]

If using an add-on graphics card, are you sure the PSU is adequate enough to power it?
If not sure, please post make & model of both those components.

 

[shortleif]

Thanks for the answer Philip, I'm using the built in GPU.

Below are all the parts in the computer.
Chassi/PSU: In Win BP655 Mini-ITX (200W PSU)
Mobo/Processor: Gigabyte GA-J1900N-D3V mITX
RAM: Corsair 4GB (1x4GB) CL9 1600Mhz VENGEANCE
SSHD: 2TB Seagate Desktop SSHD 8GB 7200rpm 64MB

 

[Phillip Corcoran]

Using integrated GPU, so power shouldn't be an issue, though personally I wouldn't use a PSU under 300w even for a basic system.
You need to establish that the monitor is actually in working order by connecting it to another system, as that aspect is often overlooked.
Often turns out to be a dead monitor.

 

[shortleif]

Yes, I'm writing here using the monitor right now. So I guess it's gonna be an RMA.