I have build my first pc. I have managed to get it running with the CPU cooler and case fan running, as well managed to access the UEFI settings. As for install ing Windows 10 OS, I followed the instructions given by Quincy Larson from freecodecamp.org in this article https://www.freecodecamp.org/news/h...build-a-bootable-iso-from-your-macs-terminal/ , since I am a currently a MAC user. The installation of the Windows 10 files was successful on my USB drive.
However during Windows 10 installation on newly build PC, when I get to choosing which drive to install the OS (between HDD and SSD), and try to proceed to install, I get an error code of "0xc0000005". I have installed using the above method twice on 2 different USB, still not able to get past this issue. Also, I tried to use Windows Media Creation tool from PC, installed it on another USB drive, also unsuccessful .
Hardware t/s steps taken, still unsuccessful
Checking on UEFI settings:
1. Boot order was correct with UEFI Partition 1 and UEFI Partition 2 in boot priority
The PC build specs are:
ASRock B450M Pro 4
AMD Ryzen 5 2600
HyperX Fury 4 GB x 2 (HX426C16FB3/4) 2600Mhz
Cooler Master PSU MWE Bronze 600
TP Link Ethernet Card
MSI GEForce GT 1030 GPU
WD Green 240 M.2 SSD
Seagate 1TB HDD
From ASRock Memory support page, it shows that for a 4GB RAM, it does not support 2666 speed. It limits at 2400. Could this be the issue, or could the RAM be physically damaged? Help!
However during Windows 10 installation on newly build PC, when I get to choosing which drive to install the OS (between HDD and SSD), and try to proceed to install, I get an error code of "0xc0000005". I have installed using the above method twice on 2 different USB, still not able to get past this issue. Also, I tried to use Windows Media Creation tool from PC, installed it on another USB drive, also unsuccessful .
Hardware t/s steps taken, still unsuccessful
- Removed M.2 SSD and leave HDD only
- Swapped the RAM sticks, changed the RAM location from A2/B2 to A1/B1 and back
- Disconnected the USB keyboard and used only Mouse USB
Checking on UEFI settings:
1. Boot order was correct with UEFI Partition 1 and UEFI Partition 2 in boot priority
The PC build specs are:
ASRock B450M Pro 4
AMD Ryzen 5 2600
HyperX Fury 4 GB x 2 (HX426C16FB3/4) 2600Mhz
Cooler Master PSU MWE Bronze 600
TP Link Ethernet Card
MSI GEForce GT 1030 GPU
WD Green 240 M.2 SSD
Seagate 1TB HDD
From ASRock Memory support page, it shows that for a 4GB RAM, it does not support 2666 speed. It limits at 2400. Could this be the issue, or could the RAM be physically damaged? Help!