Question Not sure if my gpu is seated correctly

Aug 23, 2020
5
0
10
0
View: https://imgur.com/gallery/F3Ag1T2



Hello, I just installed a new graphics card on a prebuild and wanted to know if it looks seated correctly. I’m not very good with computers and this is my first upgrade. Just wanted to make sure it looks ok since I can kinda see the gold connector (seen in the picture) but I did hear the click so I’m not sure.


Thank you
 
Last edited:
Aug 23, 2020
5
0
10
0
Ok thanks for responding though I’m a little confused because someone replied on the Imgur page and said “Nope, too far out by the clip. Sure you got the right card for your port?” so not sure what they mean by that. The card is an Evga 2060 ko ultra and the motherboard is an Asrock B450m/ac mini atx, i did check pc part picker to check if the card was compatible before I bought it and it said it was.
 
Last edited:

madmatt30

Titan
Ambassador
It doesn't look fully in at the clip end to me either to be honest
It may be the angle of the photo though.

Have your tried pulling out and reseating it again, on some cases it's very awkward to get the card in straight because of the rear io slots being tight fitting.

Are you actually up and running with this?
 
Reactions: Brigmore
Aug 23, 2020
5
0
10
0
It doesn't look fully in at the clip end to me either to be honest
It may be the angle of the photo though.

Have your tried pulling out and reseating it again, on some cases it's very awkward to get the card in straight because of the rear io slots being tight fitting.

Are you actually up and running with this?
Yes, I just booted and it’s up and running so far and its being recognized in device manager. Does that mean I’m good to go or should I just go ahead reseat it to be sure?
 

ASK THE COMMUNITY

TRENDING THREADS