[SOLVED] Not working XMP on Ryzen 7 2700x

[Deathbourne]

Hello everyone! Need help...

Two weeks ago I built a PC and found out I can't run XMP Profile.
I've read a lot of information on forums, and everyone tell I need to change timings (CL). But no matter how much I tried it I can't do this. Maybe someone know how to do this?

CPU - Ryzen 7 2700x
Motherboard - MSI B450 Gaming Pro Carbon AC
RAM - Corsair 2x16, 3200Mhz, CL16-18-18-36, 1.35V, XMP 2.0 (CMW32GX4M2C3200C16)
Power Supply - Corsair RM550x (550W)

I already reset BIOS to default, few times. Base RAM timing 15-15-15-36 on frequency 2133Mhz (SPD).
By XMP "Profile 1" boost RAM only to 2933Mhz (Support frequency), by "Memory try it!" boost to 3033Mhz.
Any other frequency don't let to start system, so I have to reset CMOS.
As I change a frequency, CPU cooler change RPM and start to make noise. I can't change RPM because after restarting system RPM return back to default.
On frequency 2133Mhz work stably without problem. On frequency 2933Mhz CPU cooler make noise and today was BSOD.

What do you advise: to keep frequency on 2133Mhz or there is some solution for boosting RAM to base frequency 3200Mhz?

 

[Unolocogringo]

First thing I would do is a BIOS update if you have not already.
Newer updates solved many RAM problems.
https://www.msi.com/Motherboard/support/B450-GAMING-PRO-CARBON-AC

 

[Deathbourne]

First thing I would do is a BIOS update if you have not already.
Newer updates solved many RAM problems.
https://www.msi.com/Motherboard/support/B450-GAMING-PRO-CARBON-AC

I have already updated to the latest version, but this did not help.
I tried to overclock the RAM using a "DRAM calculator for Ryzen", and this also did not help.
I read about the need to change the voltage, but I don't know how to do it correctly so that my RAM does not burn out.

 

[CountMike]

I have already updated to the latest version, but this did not help.
I tried to overclock the RAM using a "DRAM calculator for Ryzen", and this also did not help.
I read about the need to change the voltage, but I don't know how to do it correctly so that my RAM does not burn out.

Just don't push RAM past 1.4v and will be alright.

 

[Deathbourne]

Just don't push RAM past 1.4v and will be alright.

I set the voltage manually at 1.34v and 1.35v and 1.36v, this does not work.
In single-channel mode, RAM accelerates without problems, in dual-channel system does not start.

 

[drivinfast247]

Are they installed in the correct slots, A2-B2?

 

[Deathbourne]

Are they installed in the correct slots, A2-B2?

The RAM is installed correctly in slot A2 and B2.

 

[WKIRBY]

Hey, I just noticed this post. What memory slots are you using? I ran into this problem with an Asus mobo X570 Tuf Gaming Wifi. I have the Trident Neo 3600 ram (2 x 16) and had them in A1, B1 but could not get them to clock to 3600 also, my mouse was a little jittery so it just felt unstable. I tried different timings and settings but to no avail. Then i decided to flash the bios and try the memory sticks in A2, B2 which worked like a charm. Im running stable now at 4.2 ghz with 3600 mhz on the ram. Hope this works if you try it! Let me know

 

[scout_03]

use this and check you might have hynix chipset on http://www.softnology.biz/files.html

 

[Nemesia]

Corsair RAM comes in Samsung B-Die and Hynix. If you have Hynix most people are having issues getting them past 2933MHz.

Last week I built a Ryzen 2600 system and the Corsair I received was Samsung B-Die. Took 10 seconds to activate XMP to 3200MHz and it was totally fine.

Download the program Scout_03 gave you and it will tell you if you have Hynix or Samsung B-Die.