Nothing happen

Status
Not open for further replies.
Solution
its difficult to narrow down the issue with the provided information.. but i am just going to give a shotgun approach to solving the issue.. try them all out and see if you can get it to work.

Does your onboard video work? - if so you need to go into your BIOS and change it from onboard via to PCI-Express video.

Is the card install correctly - check the card, make sure it is plugged in all the way

Does you computer even post? - do you hear a single beep when you boot your computer,

is you monitor on? - I have to ask in this situation...

does the monitor work when you remove the card?

rozz

Distinguished
Sep 18, 2010
367
1
18,810
its difficult to narrow down the issue with the provided information.. but i am just going to give a shotgun approach to solving the issue.. try them all out and see if you can get it to work.

Does your onboard video work? - if so you need to go into your BIOS and change it from onboard via to PCI-Express video.

Is the card install correctly - check the card, make sure it is plugged in all the way

Does you computer even post? - do you hear a single beep when you boot your computer,

is you monitor on? - I have to ask in this situation...

does the monitor work when you remove the card?
 
Solution
Or you mean gpu by agp. Or this is just a big pile of B.S. ! Think you wanted to have a laugh then hey. Well hopefully your satisfied, bit sad you have to go this way to have your daily portion of fun. ( get a life or something )
If this is serious get yourself a translater or someone who knows what he's saying.This is going nowhere.
 

rozz

Distinguished
Sep 18, 2010
367
1
18,810
Rofl.. I know what you mean..

btw. he has an nvidaa 256.. thought there was a forum page about nvidia 256'ers having boot issues around here someplace... Something about having to hit the "turbo" button before booting for it to work..

:)
 

ajob_shakil

Distinguished
Sep 19, 2011
9
0
18,510
while i use the original output on board card it have no problem........but when i use the external output on my pci express it does not work........monitor show .......monitor is working cheaq the signal cable.............
 
Status
Not open for further replies.