NVME boot drive windows 10... slow write speeds around 200mb's Read speed 2100mb's

[ssmokeyy]

So I have installed a new nvme in my i7 pc. My read speeds are to spec. My write speeds are all around 200mb's. Is there any adata xpg nvme drivers? Can I use the Samsung nvme drivers if not?
My i7
i7-6850k
asus deluxe 2 x99 board
adata xpg 256gb nvme
Samsung 850 pro ssd
pny 500gb ssd xlr
16gb corsair dom 2400mhz
evga gtx1080
evga 850 p2
water cooling.
Samsung 32inch qled 144hz monitor.

 

[samer.forums]

So I have installed a new nvme in my i7 pc. My read speeds are to spec. My write speeds are all around 200mb's. Is there any adata xpg nvme drivers? Can I use the Samsung nvme drivers if not?
My i7
i7-6850k
asus deluxe 2 x99 board
adata xpg 256gb nvme
Samsung 850 pro ssd
pny 500gb ssd xlr
16gb corsair dom 2400mhz
evga gtx1080
evga 850 p2
water cooling.
Samsung 32inch qled 144hz monitor.

1- If the SSD is nearly full the write speed will decrease alot . make sure you have at least 20% of free space when you use any SSD.

2- How did you measure the 200MB/s write speed ? using benchmark software or just copying and pasting and using programs ? try using a benchmark software to see the real performance of your SSD.

 

[MCFCBlue]

Hi
I found this a while ago when i bought a Samsung 961 drive. Theres a link in it to the latest drivers

http://www.win-raid.com/t29f25-Recommended-AHCI-RAID-and-NVMe-Drivers-32.html

 

[ssmokeyy]

Using crystaldisk latest software. After some more updates today from Microsoft my xpg nvme drive is at 2100mb and 1150 mb. That is good enough for me.