Question Nvme m.2 on a Msi b450 tomahawk

Aluciene

Commendable
May 11, 2017
8
0
1,510
0
I'm not sure what to try anymore I purchased a new ryzen system with the Ryzen 2600 on an Msi b450 Tomahawk motherboard. I purchased a crucial 500gb nvme m.2 and was going to use it as the boot drive. For starters just to get to the screen to hit Del to get into the bios it takes at least a minute or two to even show up. I know with an m.2 connected sata port 5/6 are unusable. But to test if it was the ports I plugged a 1tb hdd into them and not only were they displayed in the bios but the delay to get to the screen to enter the bios was completely resolved. I've updated the bios, and have tried constantly to get the m.2 to work but it not only doesn't show up in the bios but windows 10 installer doesn't detect it either. Even with uefi in the boot setting
 
There is an installation guide in this thread:
 

ASK THE COMMUNITY

TRENDING THREADS