[SOLVED] OC Trident X 8gb 2400mhz

[fln]

Hi Guys
I have a asus maximus vii gene with 4790k at 4.4ghz now.
I have a trident X 8Gb with 2400mhz support but i cant run the xmp profile at this..
the pc bootlooped and dont answer, i have to force shutdown and load at 2133mhz
Can some one help me pls?

things i try:
- increase voltage
- try OC one stick at once
- reset mobo
- downgrade the bios version and trying oc

 

[Tolis_GR]

How many dimms are you using, 2x8gb or 4x8 gb for a total of 32 gb? Is the ram bought as a kit?

 

[fln]

How many dimms are you using, 2x8gb or 4x8 gb for a total of 32 gb? Is the ram bought as a kit?

i have 4gbx2 total 8gb 2 dims buyed at pack

 

[Tolis_GR]

Are you using the correct slots? (black, then try the red ones, i hope you are not mixing colors)If yes, check your dram voltage. If set on auto, try manual and set 1.65. If it still doesnt boot, try 1.7 volts but don't go further. If it fails again, set manual 1.65 volts and increase the cas latency by 1 (i.e from 10, to 11). Your last resort is to manually set all primary timings which are : 10-12-12-31-2N. Post your results here

 

[fln]

Are you using the correct slots? (black, then try the red ones, i hope you are not mixing colors)If yes, check your dram voltage. If set on auto, try manual and set 1.65. If it still doesnt boot, try 1.7 volts but don't go further. If it fails again, set manual 1.65 volts and increase the cas latency by 1 (i.e from 10, to 11). Your last resort is to manually set all primary timings which are : 10-12-12-31-2N. Post your results here

yes i use correct slots ofc
i try 1.65 , auto and even encrease till 1.73 and no hope...
i dont change on timings. will try