ocing an ati 9800np

[halem111]

i have an ati 9800np with infineon memory at 3.0ns. what do you reckon i could oc it to with just standard cooling nothing special. Also how much performance difference will there be, and would you say powerstrip is the best tool to use to oc it.

 

[scottchen]

Just use the <A HREF="http://www.driverheaven.net/downloads/index4.htm" target="_new"> Omega Drivers</A> It will not only increase the image quality, it also has an overclocking tool which is really good.

-Intel PIV 2.4C @ 3.84G -Asus P4P800 -OCZ Copper 2x256 4000EL memory @ 275mhz 3-4-4-8 -Sapphire 9800pro @ 490/780 -SB audigy -80G Maxtor Diamond Plus9 Ultra ATA-133 hdd -450 Enermax PSU

 

[jmecor]

there are some overclocking tools you can found on 3dguru.com

<b><font color=purple>
The real troubles in your life are apt to be things that never crossed your worried mind.
</font color=purple></b>
---
<A HREF="http://www.mapua.edu.ph/" target="_new">
MIT
</A>

 

[siranthony]

You should be able to reach 390 core 324 memory. Some people can go higher and some lower. Thats what I got which is average I think. I modded mine with a P4 heat sink and now I can do 403 335.

P4 2.4c @ 3.0 ASUS P4P800 dx Geil Golden Dragon PC4000 2.5,3,3,6 250FSB 1:1 Radeon 9800 non-pro 2 Maxtor 60gig 7200rpm 8mb cach in raid 0 SB Audigy 2 Antec True 480

 

[scottchen]

Siranthony did you get the 9800np with 3.0ns memory? or 3.3?

-Intel PIV 2.4C @ 3.84G -Asus P4P800 -OCZ Copper 2x256 4000EL memory @ 275mhz 3-4-4-8 -Sapphire 9800pro @ 490/780 -SB audigy -80G Maxtor Diamond Plus9 Ultra ATA-133 hdd -450 Enermax PSU

 

[siranthony]

It has 3.0. Just curious. Why do want to know information about my measily overclock when yours is clocked at an unbelievable 490.

P4 2.4c @ 3.0 ASUS P4P800 dx Geil Golden Dragon PC4000 2.5,3,3,6 250FSB 1:1 Radeon 9800 non-pro 403core 335mem 2 Maxtor 60gig 7200rpm 8mb cach in raid 0 SB Audigy 2 Antec True 480

 

[scottchen]

Well you have 9800np, it's running at lower voltage, and i'm really suprised that you got to 400, a friend of mine couldnt' achieve more than 370/315(loser) the problem was his memory was 3.3ns, and his GPU was probably just a crap 1, I gave him my ZM80A-HP, and some hacked up ramsinks which fits under the heatplates. Good job on that overclock. I wish i had a digital camera so i could take a pic of my vid card because the ramsinks are 4cm tall, taller than my Volcano 10 it's a hacked up 1700+ processor heatsink. What ramsinks are you using?

-Intel PIV 2.4C @ 3.84G -Asus P4P800 -OCZ Copper 2x256 4000EL memory @ 275mhz 3-4-4-8 -Sapphire 9800pro @ 490/780 -SB audigy -80G Maxtor Diamond Plus9 Ultra ATA-133 hdd -450 Enermax PSU

 

[siranthony]

Thanks for props on my O/C. I don't have any ram sinks yet. I don't think I need them. From what I've seen there is about a 50/50 chace it would help and might reduce my memory O/C. I cut up an old celeron passive heat sink but I have not used it. Putting on a modified P4 heat sink really did a good job of pulling away the heat. I was able to O/C the core and memory more. I think the infineon memory is more affected by the heat from the core than the heat they generate on thier own. When I first put on the heat sink I tried it as a passive. Man that thing got hot quik. Just like when I was grinding on it. It's amazing how much heat these GPU's generate.

P4 2.4c @ 3.0 ASUS P4P800 dx Geil Golden Dragon PC4000 2.5,3,3,6 250FSB 1:1 Radeon 9800 non-pro 403core 335mem 2 Maxtor 60gig 7200rpm 8mb cach in raid 0 SB Audigy 2 Antec True 480

 

[Guest]

Captain Obvious says that obvious 3.0ns ram equates to 333Mhz!

But you may or maynot obtain that depending on the quality of your card!

The captain suggests you install the latest Omega drivers and use the built in Overclocking tool. Increase your speeds gradually, testing as you go!

<b><font color=red>Captain Obvious To The Rescue!!!</font color=red></b>

 

[Conehead]

Conehead reminds Captain Obvious that the 9800 NP with Infineon (Infireon!) memory runs like crap even though it is rated at 3.0 ns. Few people have been able to get above 325mhz...

"There is no God but God!"
- Iraqi civilian woman after being bombed by the US.

 

[halem111]

ok so i downloaded the ati drivers so how do i overclock my card i can do things like test for artifacts but cant seem to find an overclocking utility

 

[speeduk]

<A HREF="http://www.rage3d.com/r3dtweak/" target="_new"> Click </A> for the best oc utility for ati cards (I think any way)...

<A HREF="http://service.futuremark.com/compare?2k1=7000747" target="_new"> 3D-2001 </A>
<A HREF="http://service.futuremark.com/compare?2k3=1284380" target="_new"> 3D-03 </A>
<font color=red> 120% overclocker </font color=red> (cheapskate)

 

[scottchen]

just go in the ATI's control panel and there will be a new tool bar called clock rates.

-Intel PIV 2.4C @ 3.84G -Asus P4P800 -OCZ Copper 2x256 4000EL memory @ 275mhz 3-4-4-8 -Sapphire 9800pro @ 490/780 -SB audigy -80G Maxtor Diamond Plus9 Ultra ATA-133 hdd -450 Enermax PSU