- Jan 3, 2019
- 5
- 0
- 510
Hey,
in the ASRock UEFI, I activated XMP and set the DRAM Freq to 3333 because I want my D432GB 3000-15 KLEVV CRAS II RLED K2 ESS to run overclocked, or at least at 3000 Mhz...
BUT, when booted, all my read-out tools say it was clocked for example @ 1650.4 Mhz ("current clock) / with a "maximum supportet memory clock" 1333.3
https://valid.x86.fr/xfp96g
Can I make sure that I actually get the higher RAM Speeds (DRAM fixed Voltage of 1.350 wasn't boot-stable, auto is)
It's on Z390 with a i5 9600k @ 5.1 ghz.
in the ASRock UEFI, I activated XMP and set the DRAM Freq to 3333 because I want my D432GB 3000-15 KLEVV CRAS II RLED K2 ESS to run overclocked, or at least at 3000 Mhz...
BUT, when booted, all my read-out tools say it was clocked for example @ 1650.4 Mhz ("current clock) / with a "maximum supportet memory clock" 1333.3
https://valid.x86.fr/xfp96g
Can I make sure that I actually get the higher RAM Speeds (DRAM fixed Voltage of 1.350 wasn't boot-stable, auto is)
It's on Z390 with a i5 9600k @ 5.1 ghz.
Facebook
Twitter
Instagram