OLD BH6 OWNER`S

Toggle sidebar Toggle sidebar
G

Guest

Guest
Archived from groups: alt.comp.periphs.mainboard.abit (More info?)

AIA if this has been asked before,

I have been given a BH6 which has a slot 1 350 mmx sitting in it.

I have d/l the latest bios to make it FC P3 800 compatible.anyone know
where in the UK I can get a slot 1 to 370 converter as the board itself is
still in perfect working order and I have a P3 800 FC sitting here doing
nothing.

Regards,

KNOBBER

Remember lads the international skydiving club motto

NO MUFF TO TUFF WE DIVE AT FIVE
 
Archived from groups: alt.comp.periphs.mainboard.abit (More info?)

Try eBay.

"Knobber" <no@spam.com> wrote in message news:49Qic.71$TZ6.5@newsfe2-gui.server.ntli.net...
> AIA if this has been asked before,
>
> I have been given a BH6 which has a slot 1 350 mmx sitting in it.
>
> I have d/l the latest bios to make it FC P3 800 compatible.anyone know
> where in the UK I can get a slot 1 to 370 converter as the board itself is
> still in perfect working order and I have a P3 800 FC sitting here doing
> nothing.
>
> Regards,
>
> KNOBBER
>
> Remember lads the international skydiving club motto
>
> NO MUFF TO TUFF WE DIVE AT FIVE
>
>
 
Archived from groups: alt.comp.periphs.mainboard.abit (More info?)

To be honest with you Rick I was looking to buy a new one but thanks
anyway,any other takers for my original post
"Rick" <me@privacy.net> wrote in message
news:c6gldt$akc76$1@ID-82690.news.uni-berlin.de...
> Try eBay.
>
> "Knobber" <no@spam.com> wrote in message
news:49Qic.71$TZ6.5@newsfe2-gui.server.ntli.net...
> > AIA if this has been asked before,
> >
> > I have been given a BH6 which has a slot 1 350 mmx sitting in it.
> >
> > I have d/l the latest bios to make it FC P3 800 compatible.anyone know
> > where in the UK I can get a slot 1 to 370 converter as the board itself
is
> > still in perfect working order and I have a P3 800 FC sitting here doing
> > nothing.
> >
> > Regards,
> >
> > KNOBBER
> >
> > Remember lads the international skydiving club motto
> >
> > NO MUFF TO TUFF WE DIVE AT FIVE
> >
> >
>
>
 
Archived from groups: alt.comp.periphs.mainboard.abit (More info?)

Ebay is your best bet. There is a new one on ebay here:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=3475577050&category=4614

Best also check that CPU of yours...most of the PIII 800's are 133FSB. The
BH6 only fully supports 100MHz FSB chips. You can also run any PIII up to
1GHz (100 FSB) and with a Tualatin adapter you can go to 1.4GHz.

--
*****Replace 'NOSPAM' with 'btinternet' in the reply address*****
"Knobber" <no@spam.com> wrote in message
news:49Qic.71$TZ6.5@newsfe2-gui.server.ntli.net...
> AIA if this has been asked before,
>
> I have been given a BH6 which has a slot 1 350 mmx sitting in it.
>
> I have d/l the latest bios to make it FC P3 800 compatible.anyone know
> where in the UK I can get a slot 1 to 370 converter as the board itself
is
> still in perfect working order and I have a P3 800 FC sitting here doing
> nothing.
>
> Regards,
>
> KNOBBER
>
> Remember lads the international skydiving club motto
>
> NO MUFF TO TUFF WE DIVE AT FIVE
>
>
 
Archived from groups: alt.comp.periphs.mainboard.abit (More info?)

If you leave me your coded email addy here, I should be able to mail you one
I have at the bottom of a box. Worked for me in the BH6 until the board
died.

"Knobber" <no@spam.com> wrote in message
news:49Qic.71$TZ6.5@newsfe2-gui.server.ntli.net...
> AIA if this has been asked before,
>
> I have been given a BH6 which has a slot 1 350 mmx sitting in it.
>
> I have d/l the latest bios to make it FC P3 800 compatible.anyone know
> where in the UK I can get a slot 1 to 370 converter as the board itself
> is
> still in perfect working order and I have a P3 800 FC sitting here doing
> nothing.
>
> Regards,
>
> KNOBBER
>
> Remember lads the international skydiving club motto
>
> NO MUFF TO TUFF WE DIVE AT FIVE
>
>
 
Archived from groups: alt.comp.periphs.mainboard.abit (More info?)

ok mate, know about the 100/133 and its 100,but ta anyway
"BigBadger" <big_badger@NOSPAM.com> wrote in message
news:c6gr7r$ihd$1@newsg4.svr.pol.co.uk...
> Ebay is your best bet. There is a new one on ebay here:
>
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=3475577050&category=4614
>
> Best also check that CPU of yours...most of the PIII 800's are 133FSB. The
> BH6 only fully supports 100MHz FSB chips. You can also run any PIII up to
> 1GHz (100 FSB) and with a Tualatin adapter you can go to 1.4GHz.
>
> --
> *****Replace 'NOSPAM' with 'btinternet' in the reply address*****
> "Knobber" <no@spam.com> wrote in message
> news:49Qic.71$TZ6.5@newsfe2-gui.server.ntli.net...
> > AIA if this has been asked before,
> >
> > I have been given a BH6 which has a slot 1 350 mmx sitting in it.
> >
> > I have d/l the latest bios to make it FC P3 800 compatible.anyone know
> > where in the UK I can get a slot 1 to 370 converter as the board itself
> is
> > still in perfect working order and I have a P3 800 FC sitting here doing
> > nothing.
> >
> > Regards,
> >
> > KNOBBER
> >
> > Remember lads the international skydiving club motto
> >
> > NO MUFF TO TUFF WE DIVE AT FIVE
> >
> >
>
>
 
Archived from groups: alt.comp.periphs.mainboard.abit (More info?)

To be honest me old mate I was looking for a new one but ta anyway ,anymore
takers for my original post
"JH" <jhoremans@rogers.com> wrote in message
news:c6hdu6$b6hk6$1@ID-200917.news.uni-berlin.de...
> If you leave me your coded email addy here, I should be able to mail you
one
> I have at the bottom of a box. Worked for me in the BH6 until the board
> died.
>
> "Knobber" <no@spam.com> wrote in message
> news:49Qic.71$TZ6.5@newsfe2-gui.server.ntli.net...
> > AIA if this has been asked before,
> >
> > I have been given a BH6 which has a slot 1 350 mmx sitting in it.
> >
> > I have d/l the latest bios to make it FC P3 800 compatible.anyone know
> > where in the UK I can get a slot 1 to 370 converter as the board itself
> > is
> > still in perfect working order and I have a P3 800 FC sitting here doing
> > nothing.
> >
> > Regards,
> >
> > KNOBBER
> >
> > Remember lads the international skydiving club motto
> >
> > NO MUFF TO TUFF WE DIVE AT FIVE
> >
> >
>
>
 
Archived from groups: alt.comp.periphs.mainboard.abit (More info?)

"BigBadger" <big_badger@NOSPAM.com> wrote in message
news:c6gr7r$ihd$1@newsg4.svr.pol.co.uk...
> Best also check that CPU of yours...most of the PIII 800's are 133FSB. The
> BH6 only fully supports 100MHz FSB chips. You can also run any PIII up to
> 1GHz (100 FSB) and with a Tualatin adapter you can go to 1.4GHz.

Are you saying a BH6 with the latest ABIT BIOS can run a PIII 1GHz without
any additional modifications?
 
Archived from groups: alt.comp.periphs.mainboard.abit (More info?)

If memory serves me correctly -- and that's a big question -- the BH6 only
runs PPGA cpus without an adapter. It needs a Coppermine adapter or a
hacked PPGA adapter to run Cu-mine and it needs a Tully adapter or a hacked
Cu-mine adapter to run a Tully cpu. This largely involves pin-out and
voltage issues and not MHz per se.

So find out -- I can't remember -- if the PIII 1 Gz is whatever. It's
probably Cu-mine.

That said, you then need to address FSB. If the BH6 is the first version,
it doesn't have 133 friendly AGP and PCI multipliers. This makes use of a
133 FSB cpu problematical. The second supposedly has more friendly
multipliers.

"New Question" <nq@nq.com> wrote in message
news:ZPWjc.51909$Uz1.20129@bignews3.bellsouth.net...
>
> "BigBadger" <big_badger@NOSPAM.com> wrote in message
> news:c6gr7r$ihd$1@newsg4.svr.pol.co.uk...
> > Best also check that CPU of yours...most of the PIII 800's are 133FSB.
The
> > BH6 only fully supports 100MHz FSB chips. You can also run any PIII up
to
> > 1GHz (100 FSB) and with a Tualatin adapter you can go to 1.4GHz.
>
> Are you saying a BH6 with the latest ABIT BIOS can run a PIII 1GHz without
> any additional modifications?
>
>
 
Archived from groups: alt.comp.periphs.mainboard.abit (More info?)

>> Are you saying a BH6 with the latest ABIT BIOS can run a PIII 1GHz without
>> any additional modifications?
>>

I use to run a 100fsb P3 1Ghz on my old BH6 with no problems.
 
Archived from groups: alt.comp.periphs.mainboard.abit (More info?)

--
*****Replace 'NOSPAM' with 'btinternet' in the reply address*****
"New Question" <nq@nq.com> wrote in message
news:ZPWjc.51909$Uz1.20129@bignews3.bellsouth.net...
>
> "BigBadger" <big_badger@NOSPAM.com> wrote in message
> news:c6gr7r$ihd$1@newsg4.svr.pol.co.uk...
> > Best also check that CPU of yours...most of the PIII 800's are 133FSB.
The
> > BH6 only fully supports 100MHz FSB chips. You can also run any PIII up
to
> > 1GHz (100 FSB) and with a Tualatin adapter you can go to 1.4GHz.
>
> Are you saying a BH6 with the latest ABIT BIOS can run a PIII 1GHz without
> any additional modifications?
>
Yes, the 100FSB PIII1000 will run no problem, as will a Copermine Celeron up
to 1.1GHz
 
Archived from groups: alt.comp.periphs.mainboard.abit (More info?)

"BigBadger" <big_badger@NOSPAM.com> wrote in message
news:c6q41k$alm$1@newsg2.svr.pol.co.uk...
> Yes, the 100FSB PIII1000 will run no problem, as will a Copermine Celeron
up
> to 1.1GHz

Where's the best place to buy a 100FSB PIII1000 and how much does it cost?
Will it make a real difference from my current PIII500?
 
Archived from groups: alt.comp.periphs.mainboard.abit (More info?)

> Are you saying a BH6 with the latest ABIT BIOS can run a PIII 1GHz without
> any additional modifications?

Yes. Even though there isn't official support for it, it can be done.
 
Archived from groups: alt.comp.periphs.mainboard.abit (More info?)

> To be honest me old mate I was looking for a new one but ta anyway
,anymore
> takers for my original post

Well, if he gives it to you for free, wouldn't it be worth a try?
 
Archived from groups: alt.comp.periphs.mainboard.abit (More info?)

--
*****Replace 'NOSPAM' with 'btinternet' in the reply address*****
"New Question" <nq@nq.com> wrote in message
news:fQhkc.94884$UC4.78167@bignews2.bellsouth.net...
>
> "BigBadger" <big_badger@NOSPAM.com> wrote in message
> news:c6q41k$alm$1@newsg2.svr.pol.co.uk...
> > Yes, the 100FSB PIII1000 will run no problem, as will a Copermine
Celeron
> up
> > to 1.1GHz
>
> Where's the best place to buy a 100FSB PIII1000 and how much does it cost?
> Will it make a real difference from my current PIII500?
>
It should make a noticeable difference. The only place your likely to find a
100FSB PIII1000 is ebay....but they are quite rare so they bring a high
price. What you could also consider is one of the newer FCPGA2 'Tualatin'
Celerons which go up to 1.4GHz plus a Slot-T adapter from
www.upgradeware.com
 
Archived from groups: alt.comp.periphs.mainboard.abit (More info?)

As long as it works who cares if it's 'new' or not????....after all the
board that it's going into is at least 6 years old. Even if you did get a
'new' one it would in reality be years old because they stopped making these
things ages ago.

Did you bid on the 'new' one on eBay that I gave you a link to???? Here's
another link
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=3477565556&category=4614
and there are more if you do a search.

Personally I'd take the offer of the free one.

> To be honest me old mate I was looking for a new one but ta anyway
,anymore
> takers for my original post
 
Archived from groups: alt.comp.periphs.mainboard.abit (More info?)

Thanks for the offer mate but I found a place.

Just incase there are others requiring this here is the URL

http://www.autdirect.co.uk/acatalog/index.html?http%3A//www.autdirect.co.uk/acatalog/A_U_T_Direct_M_Board_Clearance_35.html&CatalogBody

Regards

KNOBBER

Remember lads the international muff diving club motto

NO MUFF TO TUFF WE DIVE AT FIVE
"JH" <jhoremans@rogers.com> wrote in message
news:c6hdu6$b6hk6$1@ID-200917.news.uni-berlin.de...
> If you leave me your coded email addy here, I should be able to mail you
one
> I have at the bottom of a box. Worked for me in the BH6 until the board
> died.
>
> "Knobber" <no@spam.com> wrote in message
> news:49Qic.71$TZ6.5@newsfe2-gui.server.ntli.net...
> > AIA if this has been asked before,
> >
> > I have been given a BH6 which has a slot 1 350 mmx sitting in it.
> >
> > I have d/l the latest bios to make it FC P3 800 compatible.anyone know
> > where in the UK I can get a slot 1 to 370 converter as the board itself
> > is
> > still in perfect working order and I have a P3 800 FC sitting here doing
> > nothing.
> >
> > Regards,
> >
> > KNOBBER
> >
> > Remember lads the international skydiving club motto
> >
> > NO MUFF TO TUFF WE DIVE AT FIVE
> >
> >
>
>
 
Archived from groups: alt.comp.periphs.mainboard.abit (More info?)

Yeah I know that but the board has hardly been used so even if its old but
new its not been used so for a few quid its worth it to me + got the board
for sweet fa so its only going cost 4 quid but ta anyway.

Regards

KNOBBER

Remember lads the international muff diving club motto

NO MUFF TO TUFF WE DIVE AT FIVE

"BigBadger" <big_badger@NOSPAM.com> wrote in message
news:c6sp1o$26l$1@news5.svr.pol.co.uk...
> As long as it works who cares if it's 'new' or not????....after all the
> board that it's going into is at least 6 years old. Even if you did get a
> 'new' one it would in reality be years old because they stopped making
these
> things ages ago.
>
> Did you bid on the 'new' one on eBay that I gave you a link to???? Here's
> another link
>
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=3477565556&category=4614
> and there are more if you do a search.
>
> Personally I'd take the offer of the free one.
>
> > To be honest me old mate I was looking for a new one but ta anyway
> ,anymore
> > takers for my original post
>
>
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom