Only getting 10 mbps instead of 100 mbps downloadspeed

Status
Not open for further replies.

ThomasBiesteh

Reputable
Sep 27, 2014
11
0
4,510
Hi

I'm paying for 120 mbps internet and I should be getting 100 mbps (that's what it says in my router properties) but I'm only getting 10-20 mbps.. Can anyone help me?
 


You shoul get 100mbps - 100mega bits per sec(mbps)

OR

around 12 mega Bytes per second(mBps)

ie. 1 byte is 8bits

hope this helps!
 


Yeah but the problem is that I am not getting the full amount of downloadspeed I am paying for 😛
 



wait wait wait....


your connection will start to say its 100mbps because that is the max bandwidth IT can handle ,not your connection speed

if your bandwith is 10-20mbps you will get 1.25-2.5mBps

eg. it would be useles having a 1gbps(which is the bandwidth) connection on a 100mbps(your router limit) cable

 


Paying for 120, getting 10-20 wired directly to the router...

Either you have a hardware (NIC or router) or driver issue, or there is an issue with the signal from the ISP.

What does the ISP say? Does this happen on any other PC?
 




I am sure yeah, I get a maximum of 2 mb/s which is 16 mbps. I should be getting way more than that
 




It happens on both pc's I have and we are both using the same cable which is a very one.
 
What do you mean, "the same cable" ? Not at the same time, right?

Anyway, if it is happening on multiple devices, either it is the router, or upstream (ISP) from that.
What is the router make/model?
What type of connection? Cable/DSL/Fiber.
 


The same type of cable, not at the same no 😛
The router I'm using is very old (Topcom PowerLan 200, 85 mbps; that is written on my router) so that is probably the cause.
And i am using a cable
 
Status
Not open for further replies.