Hey guys. I have a Corsair Spec 02 case and just wanted to know if I should have a 120mm fan on one of the two top vent ports. Looking for the best positive pressure setup.
Currently I have 2x120 in the front of the case, 1x120 on top towards the back, 1x120 on the rear and 1x120 on the EVO 212 cooler. Should I remove the top one or just leave it there? Should I add a second one on top or place one on the bottom of the case venting in from the bottom? Thanks in advance.
(Btw planning to remove my CD drive and fix up the wire management
https://www.amazon.com/CORSAIR-Carb...r+spec+02&qid=1567819534&s=electronics&sr=1-1
Currently I have 2x120 in the front of the case, 1x120 on top towards the back, 1x120 on the rear and 1x120 on the EVO 212 cooler. Should I remove the top one or just leave it there? Should I add a second one on top or place one on the bottom of the case venting in from the bottom? Thanks in advance.
(Btw planning to remove my CD drive and fix up the wire management
https://www.amazon.com/CORSAIR-Carb...r+spec+02&qid=1567819534&s=electronics&sr=1-1

Last edited: