D DaveSwede May 10, 2021 3 0 10 May 10, 2021 #1 Can I sub DDR3-1600 1.35 V for DDR3-1333 1.5V in Dell Optiplex 980
Solution Eximo May 10, 2021 Less is good. 1.65 volt kit would be hard to get running on an OEM system, but 1.35V will either start at that voltage or run at 1.5 by default.
Less is good. 1.65 volt kit would be hard to get running on an OEM system, but 1.35V will either start at that voltage or run at 1.5 by default.
Eximo Titan Ambassador May 27, 2010 25,827 4,169 139,340 May 10, 2021 #2 Probably. Might still run at 1333 though. Upvote 1 Downvote
D DaveSwede May 10, 2021 3 0 10 May 10, 2021 #3 1333 OK, just worried about voltage diference, any thoughts? Upvote 0 Downvote
Eximo Titan Ambassador May 27, 2010 25,827 4,169 139,340 May 10, 2021 Solution #4 Less is good. 1.65 volt kit would be hard to get running on an OEM system, but 1.35V will either start at that voltage or run at 1.5 by default. Last edited: May 10, 2021 Upvote 1 Downvote Solution
Less is good. 1.65 volt kit would be hard to get running on an OEM system, but 1.35V will either start at that voltage or run at 1.5 by default.
S SamirD Judicious Jan 16, 2014 6,610 956 35,940 May 10, 2021 #6 You can. 1.35V modules can run at 1.5V if necessary. And 1600 and slow down to 1333 if necessary. It should work fine if it is compatible. Upvote 0 Downvote
You can. 1.35V modules can run at 1.5V if necessary. And 1600 and slow down to 1333 if necessary. It should work fine if it is compatible.
Facebook
Twitter
Instagram