Question OS Installed, now wont turn on with any other drives plugged in.

[Aaronboy22]

I have 2 NVME Drives, and found I was unable to turn on the pc to install the OS unless all of the other drives were unplugged. I did so, and it still won't even start the process of booting if I have any other drive plugged in.

Just NVME? gets to desktop and I can download, browse the internet, etc fine.
Plug in even a single other drive? The fans only turn on for a second and then stop.

 

[Lutfij]

You're advised to have only the drive you intend to install the OS on populating the motherboard, in your case, after a successful OS and driver installation and getting into OS GUI, you shut down then power off the system and drop in the remaining storage drives one at a time.

When posting a thread of troubleshooting nature, it's customary to include your full system's specs. Please list them like so:
CPU:
Motherboard:
Ram:
SSD/HDD:
GPU:
PSU:
Chassis:
OS:

Include the BIOS version for your motherboard at the time of writing.

 

[Aaronboy22]

CPU: Ryzen 7 5800x
Motherboard: ASUS TUF Gaming X570+ Wifi
Ram: 32 GB DDR4
SSD/HDD: 2 WD Blue 2TB SSD, 1 3TB Seagate Barracuda & 1 8TB, 2 NVME M.2 WD 1 TB Drives.
GPU: MSI GeForce RTX 2070
PSU: RM850 Corsair
Chassis: Phanteks Enthoo Pro.
OS: Windows 10 Home
Tried with a single drive, no go.